EG/B series tranny mount (help please)
06-22-2002, 08:24 PM
#1
Thread Starter
Join Date: Jan 2002
Location: North, NJ, USA
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
EG/B series tranny mount (help please)
ok i just swap in my B16 in my EG which used 2 be an automatic, i dont know which lower tranny mount 2 use, the auto mount doesnt line up with the B series transmission. which mount can i use and where can i find it
06-23-2002, 02:46 PM
#4
Honda-Tech Member
Join Date: May 2002
Location: Va Beach
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Re: EG/B series tranny mount (Slopoke)
The difference between the AT and MT is in the bracket mounted to the chassis. You can get the correct one from the dealer and have it welded in and you should be fine. I don't have too much experience with swapping AT cars while doing a MT swap as well, but I know this way works.
06-23-2002, 05:52 PM
#5
Join Date: Nov 2001
Location: DE, USA
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
Re: EG/B series tranny mount (chirp3rd)
I had an auto trans D15 before the swap.
I now have a B18C in the car. So we are kinda in a in the same boat.
U need to unweld the automatic chasis bracket on the passenger side.
Get a manual bracket fromt the junk shop and weld that in place. The integra mounts should bolt right up.
I now have a B18C in the car. So we are kinda in a in the same boat.
U need to unweld the automatic chasis bracket on the passenger side.
Get a manual bracket fromt the junk shop and weld that in place. The integra mounts should bolt right up.
Thread
Thread Starter
Forum
Replies
Last Post
the soL that could
Honda Civic / Del Sol (1992 - 2000)
2
08-21-2011 07:08 AM
JediKnight4life
Honda Civic / Del Sol (1992 - 2000)
8
06-24-2008 12:28 PM
Dyzee
Honda Civic / Del Sol (1992 - 2000)
6
03-16-2004 12:02 PM
