MINI ME AND ZC 1/4MILE 1/8MILE AND DYNO TIMES
03-15-2005, 04:24 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: Plano, TX
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
MINI ME AND ZC 1/4MILE 1/8MILE AND DYNO TIMES
THOUGHT THIS MIGHT MAKE AN INTERESTING THREAD....... PLEASE POST AS FOLLOWS.
R/T
60'TIME
1/8 MILE
1/4 MILE
MODIFICATIONS LIST----
IF YOU ALSO HAVE DYNO CHARTS OR EVEN YOUR SLIPS PLEASE POST THEM. I FEEL THAT ALL PICTURES OF YOUR SETUP SHOULD BE WELCOME HERE.
R/T
60'TIME
1/8 MILE
1/4 MILE
MODIFICATIONS LIST----
IF YOU ALSO HAVE DYNO CHARTS OR EVEN YOUR SLIPS PLEASE POST THEM. I FEEL THAT ALL PICTURES OF YOUR SETUP SHOULD BE WELCOME HERE.
03-15-2005, 04:31 PM
#2
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: Plano, TX
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
Re: MINI ME AND ZC 1/4MILE 1/8MILE AND DYNO TIMES (jsw_1986)
I AM DRIVING A 1995 HONDA CIVIC DX.
60'--- 2.715
1/8--- 10.957
MPH--- 65.63
MODIFICATIONS--- IT'S A D15B7 BLOCK WITH A D16Y8 HEAD, NO NAME SHORT RAM INTAKE, NO NAME SHORT SHIFTER, RIDING ON 16'' ENKEI WHEELS AND TOYO PROXES FOR RUBBER.
HOPEFULLY THERE'S SOME MORE #'S TO LAY DOWN. GONNA TRY SOME 14" STEELIES NEXT TIME
60'--- 2.715
1/8--- 10.957
MPH--- 65.63
MODIFICATIONS--- IT'S A D15B7 BLOCK WITH A D16Y8 HEAD, NO NAME SHORT RAM INTAKE, NO NAME SHORT SHIFTER, RIDING ON 16'' ENKEI WHEELS AND TOYO PROXES FOR RUBBER.
HOPEFULLY THERE'S SOME MORE #'S TO LAY DOWN. GONNA TRY SOME 14" STEELIES NEXT TIME
04-15-2005, 01:38 PM
#3
Honda-Tech Member
iTrader: (1)
Join Date: Jan 2005
Location: Miami, FL, USA
Posts: 914
Likes: 0
Received 0 Likes
on
0 Posts
Re: MINI ME AND ZC 1/4MILE 1/8MILE AND DYNO TIMES (jsw_1986)
100% stock 96 ex(d16y8) w/ a slipping clutch
R/T -- .899
60' -- 2.629
1/8 -- 11.451
1/4 -- 17.717
R/T -- .899
60' -- 2.629
1/8 -- 11.451
1/4 -- 17.717
04-15-2005, 03:35 PM
#4
Join Date: Sep 2004
Location: nyce1s.com landvia san jose, ca
Posts: 1,622
Likes: 0
Received 0 Likes
on
0 Posts
Re: MINI ME AND ZC 1/4MILE 1/8MILE AND DYNO TIMES (MiMiK)
89 ef hatch
mini swap
aem intake
dc headers
d16a6 bottom end
99 ex head v tec
port and polish head
on street tires
15.2 1/4 mile
dont remaber 60 foot or speed
dyno yesterday
128hp to the wheels
106tq
new set up coming soon
mini swap
aem intake
dc headers
d16a6 bottom end
99 ex head v tec
port and polish head
on street tires
15.2 1/4 mile
dont remaber 60 foot or speed
dyno yesterday
128hp to the wheels
106tq
new set up coming soon
04-15-2005, 05:17 PM
#6
damn....my stock single cam non-vtec in my EF ran a 15.3 on 22inch slicks....car was bone stock!! w/ vtec head, obd1 conversion, intake, header, exhaust it ran a 14.7 on 22inch slicks
04-16-2005, 02:53 PM
#7
Honda-Tech Member
Join Date: Oct 2003
Location: jacksonville, florida, usa
Posts: 973
Likes: 0
Received 0 Likes
on
0 Posts
Re: (90sohcHATCH)
91 crx dx
sohc nonvtec zc
CAI, 4-1 HEADER, 2.25" EXHAUST, FPR, PG7 ECU
on stock steelies, 175/75/13's 28psi, ground control coilovers
9.7@73 1/8th 2.2-2.3 60fts
15.1@90 1/4 mile.
*i have more mods now but havent been back for new times yet.
sohc nonvtec zc
CAI, 4-1 HEADER, 2.25" EXHAUST, FPR, PG7 ECU
on stock steelies, 175/75/13's 28psi, ground control coilovers
9.7@73 1/8th 2.2-2.3 60fts
15.1@90 1/4 mile.
*i have more mods now but havent been back for new times yet.
Thread
Thread Starter
Forum
Replies
Last Post
LurkerS8
Forced Induction
7
10-10-2005 01:38 PM
