Print  Email  Subscribe  RSS  Help
 ACT clutch & flywheel for Accord [Archived]
Author Post

typhoon




Offline

429 posts [100%]
Milwaukee WI
7-26-2003
  ACT clutch & flywheel for Accord« » 8:29 AM 4/1/2006 Reply  Edit

I've searched and most posts are in F.S.

I have a '92 accord and the OEM clutch is starting to go. I am thinking about getting the ACT H.D. pressure plate w/ street disk and streetlight flywheel. I've heard from a Honda tech that the hydrolic clutch is not a good combo with the aftermarket clutch. (problems...a lot of chatter, clutch goes bad after a couple of 10-20k miles)

Does anybody have an ACT clutch and flywheel in their accord? How do you like it? Any problems?

-Thanks


MySpace
My cars



honda3x23




Offline

371 posts [100%]
st paul mn
11-26-2005
 « « » 12:07 PM 4/1/2006 Reply  Edit

i have a similar set up in my car, i like the product.

we just dont have the same application sorry..


12" apple g4 power book.. w/ extras 700 OBO

wheshac at dunwoody.edu for detials, information, offers etc

Corruption




Offline

456 posts [98%]
NJ
3-20-2005
 « Re: ACT clutch & flywheel for Accord (typhoon)« » 1:56 PM 7/24/2008 Reply  Edit

I know this thread is 2 years old plus, but im trying to figure out what I should do in terms of a new clutch. My OEM is on it's way out. I want something with more of a grab and I was considering exedy stage 1 with a fidanza flywheel.

However, I've read that some people have had fitment issues with the fidanza 8lbs. flywheel for the F23. The flywheel is listed, from what I've seen, for the h22, h23, f23, etc.

So at this point im considering the exedy stage 1 still with an ACT flywheel, since it's a bit heavier than the fidanza, it's a one piece flywheel, and it's listed solely for fitting the f23 tranny.....


2001 Accord LX 5spd
EX wheels
AEM CAI
KONI Yellows/Ground Control Coilovers - 450/350
APEXi WSII Cat-back exhaust

DCFIVER




Offline

1576 posts [100%]
Smog tech in training...
3-1-2004
 « Re: ACT clutch & flywheel for Accord (Corruption)« » 4:04 PM 7/24/2008 Reply  Edit

Quote, originally posted by Corruption »

However, I've read that some people have had fitment issues with the fidanza 8lbs. flywheel for the F23. The flywheel is listed, from what I've seen, for the h22, h23, f23, etc.

The H22, H23 ,F22, F23 all have the exact same bolt patterns and the transmissions and related parts are all interchangeable between manual trans. the fidanza flywheel is a bit light foer some people and the street light is usually the best bet for a DD'er.


FS: H22 cylinder head w/ bent valves-$200 obo
obd2 H22 Distributor-$100 PM me
SO. CAL BUYERS PREFERED.
   

» Return to Honda Accord (1990 - 2002)
Forum Jump
Quick Reply

Powered by ZeroForum 2.1.2b. ©2008 RelyNet, Inc.