mandeecandeex3

so I wanna buy XXR 522 wheels from someone but will they fit right?

they are 15x8
zero offset

i currently run rota track rs with a +42 offset
they look like shxt on my hatch for some reason.
meaning the bad type of camber.

i dont want an explanation of offset because its so confusing rofl i just wanna know if they will fit right to my car.

toyomatt84

iTrader: (1)

Those won't fit at all, without heavy modifications.

doood

iTrader: (1)

0 offset wheels do not belong on a fwd honda. period.

mandeecandeex3

what offset should i look for then?

ive been looking at enkei rs-evolutions with a +30 offset and rota slips with +45 offset.

kyden

i suggest you do some reading about offsets.

mandeecandeex3

i have and i know what it is but i cant figure out how to relate it to the car.

toyomatt84

iTrader: (1)

With proper sized tires, you're looking at 15x7 +35's if you haven't modified the body to increase wheel/tire clearance. If you have modified the body, then you could get away with 15x8 +35's.

Caddiman

iTrader: (2)

nothin lower than 15. maybe 10 but now your pushing it. go check out the low offset thread. I ran 16x8 0 offset and paid for it with a fender. I just painted my car a few months ago and i chewed up a fender within weeks of having the 0 offset. those wheels are long gone now. if you dont know what your doing your either gonna roll around lookin stupid, or mess up your fenders, and look stupid..lol

0 offset =

mandeecandeex3

thanks!

JDMPIRE_69

HEY BRO,U BASICALLY CAN PUT WHATEVER U WANT ON UR CAR IT ALL DEPENDS ON U TASTE.I HAVE 16X8'S 0 OFFSET 531'S ON MY ACCORD AND THEY STUCK OUT ALSO B4 I FLARED MY FENDERS AND MY CAR IS BUILT FOR WIDER RIMS,IMMAGINE URS LOLZ.SO U HAVE 2 CHOICES IF U WANT TO RUN 0 OFFSET..1.)GET A CAMBER KIT AND RUN A REDICULOUS CAMBER AND GO TO THE SHOP AND HAVE THEM ADJUST UR TOE AND GET A WHEELING ALIGNMENTULL STILL SHREAD TIRES BUT NOT AS FAST 2.)HAVE YOUR FENDERS ROLLED,THEN FLARED AND STILL GET A CAMBER KIT BUT U WONT HAVE TO CAMBER UR WHEELS AS BAD.IF U WANA KNOW ABOUT OFFSETS AND NOT LOOKING FOR UR RIMS TO POKE OUT U SHOULD GO WITH +10 OFFSET ON A 15 OR 16X7 RIM OR U CAN GO +15 OFFSET ON A WIDE WHEEL SUCH AS 15 OR 16X8 AND ITLL SIT PLUSH!! HOPE IVE HELPED BRO.TAKE CARE

copaseticEM1

like someone stated above. unless youve done fender rolling and or pulling you want to go with between +32 and +40 depending on the width of the wheel.