// Tire Stretching and Low Offset Fitment Information Requests \\
#301
esm 002r
Hello... thinking bout getting esm 002r for my integra which sits pretty low... I had a few concerns tho... I was going to get 16x8 for the fronts and 16x9 for the rear... I was wondering what size tire I should run on these wheels... currently i am running 15x7 with a 205/50/15 tire and about -2 degrees camber all around with blox camber kits... in the rear my tire is real close to touching the spot where the rear bumper mounts to the quarter panel... and was also wondering will these camber kits give me enough camber to fit the wheels? Thanks
#303
Re: // Tire Stretching and Low Offset Fitment Information Requests \\
Total noob here comming from a vw/miata/mustang/ everything other than a honda background my knowledge on all things offset pertaining to honda/acura is limited at best. I've recently bought a 1999 civic si-r and I'm looking to switch up the wheels and stance. Looking to pick up esm 002r in 16x9 et. 15 and blackworks front and rear camber kits. looking to run a 205/40r16 tire. I know all of this should fit but I was wondering how much of a fender roll/pull will I be looking at to fit this all up under the stock fenders? ( Car is in T1R b maxes at the moment as well.) Thanks in advance guys!!!
Last edited by rubbinem1; 01-27-2015 at 09:09 PM.
#304
Honda-Tech Member
Join Date: Aug 2006
Location: Virginia Beach, VA, USA
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Re: // Tire Stretching and Low Offset Fitment Information Requests \\
Total noob here comming from a vw/miata/mustang/ everything other than a honda background my knowledge on all things offset pertaining to honda/acura is limited at best. I've recently bought a 1999 civic si-r and I'm looking to switch up the wheels and stance. Looking to pick up esm 002r in 16x9 et. 15 and blackworks front and rear camber kits. looking to run a 205/40r16 tire. I know all of this should fit but I was wondering how much of a fender roll/pull will I be looking at to fit this all up under the stock fenders? ( Car is in T1R b maxes at the moment as well.) Thanks in advance guys!!!
One or the other...no biggie...both...going to require a serious roll...if not a pull too.
#305
15x8 tire size please!!!! What do y'all run
I'm new to the forum. This is my first civic and I'm pretty stoked. Not doing a lot of stuff to it but what I'm going to describe as vividly as possible to get you a good idea and try and help me find a good tire size. Just got me a 94 civic ex sedan (white) put a brand new jdm b16a motor in it. Just got me a set of function and form type 1 coilover shocks. Got front and rear upper and lover control arm camber kit. And just got a set of 15x8 STR 513 white wheels with 0 offset. Ita got some super ugly 17s on it now and sits pretty dumb. So i will be sitting it pretty damn low to the ground. I was trying to get some help with tire sizes. Will be my only car work is 65 miles one way and 65 back 5 days a week. Don't want it to look too meaty and dumb. I was thinking about 195/50. What do you guys think?? Pics of your car would be helpful thanks guys.
#307
Honda-Tech Member
Join Date: Nov 2014
Location: Torrance, CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Re: integra 16x 8.5 with a +20 offset
Here's a pic for reference. Apparently a 16x8.5 +20
Google is your friend on this one.
#309
Honda-Tech Member
Join Date: Nov 2014
Location: Torrance, CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Re: // Tire Stretching and Low Offset Fitment Information Requests \\
I think these are 16x7.5 +32
#311
Honda-Tech Member
Join Date: Nov 2014
Location: Torrance, CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Re: // Tire Stretching and Low Offset Fitment Information Requests \\
#315
Honda-Tech Member
Re: // Tire Stretching and Low Offset Fitment Information Requests \\
just ordered 15x8 +0 xxr 538's for my cd5 . only suspension modification is f&f type 1's . besides fender rolling , what else will I need to do ? and what size tire should I run ? I was thinking either 165/50 or 195/55 .
Last edited by Luke_CD5; 02-19-2015 at 04:37 PM.
#316
Wheel fitment on a db8!!!
Hey guys new to the site! But I got a question on wheels/tire set up. I ordered klutch wheels 16x9s offset of 18 all the way around. Need help on tire size n right fitment. Please help! Any info and pictures will help too! Thanks guys!
#318
Re: Wheel fitment on a db8!!!
I have a fender roller. But 205s? I was told to go 195 I wanna stretch the tire n also have some poke too. For the camber kits why do I need them? I don't want to much camber but the factory camber I can deal with.
#320
Re: Wheel fitment on a db8!!!
do you know if you run into a problem with that low offset? im trying to get this done without some camber kits..... let me know what i will be running into i should say
#322
Re: // Tire Stretching and Low Offset Fitment Information Requests \\
Hey guys sorry for being the new kid here and not knowing much but I figured I could really use your help. I'm new to the stance and low life and I wanted some input. I was going to buy the 16x8.25 +0 XXR 527's for my 98 Integra GSR but I dont know what size tires to get to have a nice poke/stretch look. I'm lowering my car with function and form coils and I was also planning on rolling my fenders. Should I also do anything with adjusting camber and maybe add spacers? Any help would be much appreciated! Thanks!
#323
Honda-Tech Member
Re: // Tire Stretching and Low Offset Fitment Information Requests \\
165 or 175 for a nice stretch , and 195 for a small stretch . you'll be cutting it real close , i'd run some rear camber if you don't wanna pull your fenders . front should be good as is , may even need spacers .
#324
tire help
I have a set of 15x8 whistler wheels with 2.5 in lip and offset is 20 i think how would 165/45r15 look on them if anyone has a pic and there federal formoza fd1 68v those are the ones i want will i have that nice look ?
#325
Honda-Tech Member
iTrader: (2)
Re: // Tire Stretching and Low Offset Fitment Information Requests \\
Quick question guys
I have some 16x7 +40 Sprint Hart CPRs. I'm debating on running a 15mm spacer with 205/45 tires. I would like to avoid doing any modifications to my fenders. I'd also like to keep my inner fender liners on. I don't plan on being slammed. Just want to tuck a tiny bit of tire tread in the front. In the rear i want to be even with tire. Do you guys think this is possible?
I have some 16x7 +40 Sprint Hart CPRs. I'm debating on running a 15mm spacer with 205/45 tires. I would like to avoid doing any modifications to my fenders. I'd also like to keep my inner fender liners on. I don't plan on being slammed. Just want to tuck a tiny bit of tire tread in the front. In the rear i want to be even with tire. Do you guys think this is possible?