Worst Fabrication Pictures
01-29-2008, 10:26 AM
#27
Honda-Tech Member
Thread Starter
Join Date: Jan 2002
Location: WA
Posts: 2,949
Likes: 0
Received 0 Likes
on
0 Posts
Re: (B.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B. »</TD></TR><TR><TD CLASS="quote">lmao!!!the guys over on pirate 4x4 would love this **** LOLOL.....</TD></TR></TABLE>
I actually got quite a few picture off of pirate 4x4..... haha. Its another forum that I follow daily.
I actually got quite a few picture off of pirate 4x4..... haha. Its another forum that I follow daily.
01-29-2008, 01:48 PM
#30
Honda-Tech Member
Join Date: Sep 2002
Location: stevens point, WI, 54481
Posts: 2,940
Likes: 0
Received 0 Likes
on
0 Posts
Re: (kyden)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kyden »</TD></TR><TR><TD CLASS="quote">besides the hack job lifts, how do the driveshafts even turn with such an extreme angle? some of those look over 45 degrees!</TD></TR></TABLE>
Normally they use a double u-joint off the case and than just turn the axles to compensate on the other end.
Normally they use a double u-joint off the case and than just turn the axles to compensate on the other end.
01-29-2008, 10:54 PM
#31
Honda-Tech Member
Join Date: Sep 2004
Location: Lynnwood, WA, US
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
Re: (140sx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 140sx »</TD></TR><TR><TD CLASS="quote">
hahahaha
who would have thought i would see angry earls car here...</TD></TR></TABLE>
its fabrication right haha. believe it or not the fender exit exhaust is gone, he finally got over how loud it was (it even had a silencer in it at all times). i got sparks in my ear welding under his car last week
.
Marcus
hahahaha
who would have thought i would see angry earls car here...</TD></TR></TABLE>
its fabrication right haha. believe it or not the fender exit exhaust is gone, he finally got over how loud it was (it even had a silencer in it at all times). i got sparks in my ear welding under his car last week
. Marcus
01-30-2008, 08:45 AM
#32
Honda-Tech Member
my main questions is do these dipshits know what they are doing is dangerous and ghetto and they just dont care or are they really just stupid enough to think this is acceptable?
i'm just floored by some of this.
i'm just floored by some of this.
01-30-2008, 08:46 AM
#33
Honda-Tech Member
Re: (jweller)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jweller »</TD></TR><TR><TD CLASS="quote">
I don't think the first weld i ever made looked that bad. That is flat out embarrassing. Why would you take a pic and post that on the interweb?
and what is up with "I don't have square tubing so I'll just stitch weld some angle iron together"</TD></TR></TABLE>
the very first thing i welded was galvanized conduit that i welded with a home depot wire feed flux core welder.
it still looked better than most of these pics.
I don't think the first weld i ever made looked that bad. That is flat out embarrassing. Why would you take a pic and post that on the interweb?
and what is up with "I don't have square tubing so I'll just stitch weld some angle iron together"</TD></TR></TABLE>
the very first thing i welded was galvanized conduit that i welded with a home depot wire feed flux core welder.
it still looked better than most of these pics.
02-06-2008, 06:39 PM
#39
Honda-Tech Member
Join Date: Feb 2000
Location: Milwaukee, WI
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: Worst Fabrication Pictures (RynoDyno312)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RynoDyno312 »</TD></TR><TR><TD CLASS="quote">
Is that muffler being used as a plenum over the carb? What the hell?</TD></TR></TABLE>
It's TWIN TURBO!
Is that muffler being used as a plenum over the carb? What the hell?</TD></TR></TABLE>
It's TWIN TURBO!
02-06-2008, 06:53 PM
#40
Honda-Tech Member
Thread Starter
Join Date: Jan 2002
Location: WA
Posts: 2,949
Likes: 0
Received 0 Likes
on
0 Posts
Re: Worst Fabrication Pictures (Finest)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Finest »</TD></TR><TR><TD CLASS="quote">
It's TWIN TURBO! </TD></TR></TABLE>
Ha! good eye, I didn't even notice that.
It's TWIN TURBO!
</TD></TR></TABLE>Ha! good eye, I didn't even notice that.
02-07-2008, 06:45 PM
#45
Honda-Tech Member
Join Date: Jul 2006
Location: missouri
Posts: 4,009
Likes: 0
Received 0 Likes
on
0 Posts
you should be able to find quite a bit on this site.... http://www.homemadeturbo.com
but here is my contribution..
http://video.google.com/videop...dex=0
but here is my contribution..
http://video.google.com/videop...dex=0
02-09-2008, 11:48 PM
#46
Junior Member
Join Date: Aug 2007
Location: Dayton, oh, usa
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
This is what happens when we have a few of our friends over on a cold *** Friday night and way too much beer. in under 6 hours a normal CRX went from daily driver to super ghetto death trap with a GT28RS on it. we built it ghetto on purpose to race the Chopper shop next door. they built a ghetto turbo ford festiva in two days. they kept coming asking for parts and after the 10th trip in i had to follow them back to their shop to find out what the hell they were up to.
This thing lasted for about a month, we did allot of tearing around in this thing...
a little more info, there were no doors,no hatch,no passenger seat, we sure had fun riding shot gun... we made door bars out of some scrap shelf posts we had laying around, the seat was a 240sx seat welded to the car, a ratchet strap for a seat belt. that wing you see is really as wide as our shop door in fact it was really really dangerous and caught a person in the head once. we added a headlight on top of the intercooler via duct tape since we drove this thing at night alot. It had donuts on the rear tires normal tires up front. we ended up blowing out the auto transmission and seizing up the Cheap *** ebay GT28rs eventually the snow fried the exposed ECU and we scrapped it.
This thing lasted for about a month, we did allot of tearing around in this thing...
a little more info, there were no doors,no hatch,no passenger seat, we sure had fun riding shot gun... we made door bars out of some scrap shelf posts we had laying around, the seat was a 240sx seat welded to the car, a ratchet strap for a seat belt. that wing you see is really as wide as our shop door in fact it was really really dangerous and caught a person in the head once. we added a headlight on top of the intercooler via duct tape since we drove this thing at night alot. It had donuts on the rear tires normal tires up front. we ended up blowing out the auto transmission and seizing up the Cheap *** ebay GT28rs eventually the snow fried the exposed ECU and we scrapped it.
02-10-2008, 05:36 AM
#47
Honda-Tech Member
Join Date: Nov 2004
Location: MA
Posts: 687
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Jon@ForcedFabllc.com)
whooaaa .. that really bordum at least you admit to it had to do with all bordum.
I seen a kid at the local track with a few of his buddy in a GEO and they had some crap like that done to it Ireally wished i had pictures of that crap with some getto side mount exhaust everything stick out the hood. And then acted all calm and like if the car was a ferrai had team geo painted all over the sides. And worst of all he ran like a 20 and sprayed oil all over the track!!!! That was
. Just figured i share that with H-t!
I seen a kid at the local track with a few of his buddy in a GEO and they had some crap like that done to it Ireally wished i had pictures of that crap with some getto side mount exhaust everything stick out the hood. And then acted all calm and like if the car was a ferrai had team geo painted all over the sides. And worst of all he ran like a 20 and sprayed oil all over the track!!!! That was
. Just figured i share that with H-t!
02-14-2008, 08:35 PM
#48
Honda-Tech Member
Join Date: Sep 2004
Location: chicago, il
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Re: (bamboosted)
Had a kid come to us over the summer to look over his car and see if we could help him make it less ghetto after a local shop charged hime $7500 to install a turbo kit on his GTI the 7500 did not include the turbo kit itself.....kid came over and this is one sweet piece we found lol.
Best part is at a show the next month they had a booth setup. So while they had a decent amount of people over checking them out we thought it would be fun to go give them back the downpipe incase they needed to use it on another car... Needless to say they didnt think it was as funny as we did
Best part is at a show the next month they had a booth setup. So while they had a decent amount of people over checking them out we thought it would be fun to go give them back the downpipe incase they needed to use it on another car... Needless to say they didnt think it was as funny as we did
02-14-2008, 08:45 PM
#49
Honda-Tech Member
Join Date: Jul 2006
Location: missouri
Posts: 4,009
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TommyC83)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TommyC83 »</TD></TR><TR><TD CLASS="quote">
Best part is at a show the next month they had a booth setup. So while they had a decent amount of people over checking them out we thought it would be fun to go give them back the downpipe incase they needed to use it on another car... Needless to say they didnt think it was as funny as we did </TD></TR></TABLE>
i would have paid to see that LOL...
there sure is alot of dumb people around that fall for the outrageous prices shops charge for crap...
Best part is at a show the next month they had a booth setup. So while they had a decent amount of people over checking them out we thought it would be fun to go give them back the downpipe incase they needed to use it on another car... Needless to say they didnt think it was as funny as we did
</TD></TR></TABLE>i would have paid to see that LOL...
there sure is alot of dumb people around that fall for the outrageous prices shops charge for crap...
02-14-2008, 09:02 PM
#50
Honda-Tech Member
Join Date: Sep 2002
Location: stevens point, WI, 54481
Posts: 2,940
Likes: 0
Received 0 Likes
on
0 Posts
Re: (mike93eh2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mike93eh2 »</TD></TR><TR><TD CLASS="quote">
i would have paid to see that LOL...
there sure is alot of dumb people around that fall for the outrageous prices shops charge for crap...</TD></TR></TABLE>
yes it is sick, but they just don't know any better at the time. Most people come around after awhile.
i would have paid to see that LOL...
there sure is alot of dumb people around that fall for the outrageous prices shops charge for crap...</TD></TR></TABLE>
yes it is sick, but they just don't know any better at the time. Most people come around after awhile.