Startin my project thread.......
08-30-2007, 05:26 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Cary, NC
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Startin my project thread.......
Got this 94 BB4 stock, been messin with it for a couple years now, had the engine out last year for the build-up, the year before that i did body work/ suspension.
runs good but the time of year is starting where i cant drive it anyways so i figured i would get an early start this year so i could get it out early spring, Well this winters agenda is:
ABS Delete (and clean up all the fuel/brake lines under the hood
Manual rack conversion
And to get under the hood lookin as good as it runs!
Off to a good start, got the bay mostly stripped day 1 And when i refer to "day" i usually mean the couple of hours i can squeez in after work
You see in the pics that the fuse box and harness are still through the firewall in the stock location, ireally dont want to gut my HVAC box to make room (i like my little touch of luxury in my lude, still wanna keep some of the creature comforts, but anyways i think i got some good ideas to keep things compromised, as you will see over the next couple of weeks
Day 2 got everything prepped for welding i know they are very small areas cleaned around the holes to be welded but im gonna be sanding down the entire engine bay anyways!
I got some of the welding done but i was in a rush to get out of there and didnt snap any pictures yet, will post updates as they come!
Heres some pics of the engine build, ill get it to details with the specs of this later!
sorry pics are so small, dont really know why they are??
Modified by H22Luda720 at 9:36 PM 8/30/2007
runs good but the time of year is starting where i cant drive it anyways so i figured i would get an early start this year so i could get it out early spring, Well this winters agenda is:
ABS Delete (and clean up all the fuel/brake lines under the hood
Manual rack conversion
And to get under the hood lookin as good as it runs!
Off to a good start, got the bay mostly stripped day 1 And when i refer to "day" i usually mean the couple of hours i can squeez in after work
You see in the pics that the fuse box and harness are still through the firewall in the stock location, ireally dont want to gut my HVAC box to make room (i like my little touch of luxury in my lude, still wanna keep some of the creature comforts, but anyways i think i got some good ideas to keep things compromised, as you will see over the next couple of weeks
Day 2 got everything prepped for welding i know they are very small areas cleaned around the holes to be welded but im gonna be sanding down the entire engine bay anyways!
I got some of the welding done but i was in a rush to get out of there and didnt snap any pictures yet, will post updates as they come!
Heres some pics of the engine build, ill get it to details with the specs of this later!
sorry pics are so small, dont really know why they are??
Modified by H22Luda720 at 9:36 PM 8/30/2007
09-02-2007, 03:06 PM
#4
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Cary, NC
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Re: Startin my project thread....... (H22Luda720)
UPDATES!! 
Holes welded Shut:
Za Putty Applied
Was in to much of a rush to take pics of the sanding process, wanted to see it in primer
Wow i need to clean my garage
Will post as they come
Holes welded Shut:
Za Putty Applied
Was in to much of a rush to take pics of the sanding process, wanted to see it in primer
Wow i need to clean my garage
Will post as they come
09-02-2007, 06:53 PM
#6
Honda-Tech Member
Join Date: May 2002
Location: BeLlInGhAm, Wa
Posts: 3,599
Likes: 0
Received 0 Likes
on
0 Posts
Re: (preludestud11)
for taping...go to the paint store and get "fine line" tape. Other wise you'll have hard jagged edges.
Looks great so far! I want to do this TERRIBLY on my DD.
Looks great so far! I want to do this TERRIBLY on my DD.
09-02-2007, 07:03 PM
#7
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Cary, NC
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Re: (.RTErnie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .RTErnie »</TD></TR><TR><TD CLASS="quote">for taping...go to the paint store and get "fine line" tape. Other wise you'll have hard jagged edges.
Looks great so far! I want to do this TERRIBLY on my DD. </TD></TR></TABLE>
mmm.. never heard of it, i tried to mask in the most inconspicuous areas, thanks anyways, i have been wanting to do this for awile, should have last time the engine was out and the block was away for macine work, but i was just to lazy
Looks great so far! I want to do this TERRIBLY on my DD.
</TD></TR></TABLE>mmm.. never heard of it, i tried to mask in the most inconspicuous areas, thanks anyways, i have been wanting to do this for awile, should have last time the engine was out and the block was away for macine work, but i was just to lazy
Thread
Thread Starter
Forum
Replies
Last Post
The Weather Man
Honda Prelude
12
09-16-2005 07:52 PM
mstewar
Acura Integra Type-R
63
01-11-2004 12:35 PM
