SOHC D-Series VTEC Timing Cover mold construction
#1
Honda-Tech Member
Thread Starter
SOHC D-Series VTEC Timing Cover mold construction
We started with a BNIB cover as you see here...
Here we see design work complete on the plug as it waits to be waxed and have PVA mold release sprayed on.
Last edited by Jaime 91SiB18; 01-17-2015 at 08:43 PM.
#4
Honda-Tech Member
Thread Starter
Re: SOHC D-Series VTEC Timing Cover mold construction
Thanks fellas!
Still at it for sure, and stepping it up this year.
-->(Look for our CRX Roof Replacement this summer)
As for this project, the previous picture shows the design work done on our mold plug. To begin the mold we first apply a mold release wax, then spray a PVA (polyvinyl alcohol) mold release to ensure trouble free part removal after cure.
Once dry, we use a gel coat cup gun to spray Orange Tooling Gel Coat. After that a tooling dough fillets reinforce the detail. Next many layers of Chopped Strand Mat are applied and the mold is finally capped with a fiberglass Tooling Fabric specifically made for molds.
Fast forward past cure and removal, we have a production level mold ready for combat.
#HatchElite
Still at it for sure, and stepping it up this year.
-->(Look for our CRX Roof Replacement this summer)
As for this project, the previous picture shows the design work done on our mold plug. To begin the mold we first apply a mold release wax, then spray a PVA (polyvinyl alcohol) mold release to ensure trouble free part removal after cure.
Once dry, we use a gel coat cup gun to spray Orange Tooling Gel Coat. After that a tooling dough fillets reinforce the detail. Next many layers of Chopped Strand Mat are applied and the mold is finally capped with a fiberglass Tooling Fabric specifically made for molds.
Fast forward past cure and removal, we have a production level mold ready for combat.
#HatchElite
#5
Re: SOHC D-Series VTEC Timing Cover mold construction
Nice work!!! Hey dude I got a few people wanting a crx roof!!!! If you like I can send them your way. I have too much work coming in from the evo world right now. A couple people on here were wanting deletes made as well for the crx.
#6
Honda-Tech Member
Thread Starter
Re: SOHC D-Series VTEC Timing Cover mold construction
My buddy's wife wrecked their CRX the very first time he let her drive it to work, so just by chance I ended up with it. I just got it up to the shop yesterday to begin preparing and planning the mold design. I found out the Harbor Freight windshield removal tool is really a decoy, not tough enough for actual use... Lol.
A brick and a sawzall will get the job done though.
I plan to have the roof project completed by, and debut at 'Rimz and Ribz' and 'Blox Evolution'.
Send me some of your contact info and I'll shoot any work I can your way as we'll.
As for the timing cover, it should be only days until it gets laid up in 3k 2x2 Twill weave carbon fiber. Results to follow....
Trending Topics
#9
Honda-Tech Member
Thread Starter
Re: SOHC D-Series VTEC Timing Cover mold construction
"What kind of clay?" you ask, uh ..lol
kind of a mashup of all the left over clay we had. haha.
but more specifically, it's a mix of the yellow from the first pic and the following two.
#10
Honda-Tech Member
Thread Starter
Re: SOHC D-Series VTEC Timing Cover mold construction
We actually vacuum bag, wet, using strechlon 200 bagging film...
So that allows us to attach just a single layer of bagging film to the flange itself with enough room for the vacuum port.
I have yet to infuse. It seems to me that infusion is more applicable for larger parts, and worry about the volume of epoxy waste considering the cost per gallon. Actually I want to to try laying up with pre-preg, but have concerns about the short shelf life.
So that allows us to attach just a single layer of bagging film to the flange itself with enough room for the vacuum port.
I have yet to infuse. It seems to me that infusion is more applicable for larger parts, and worry about the volume of epoxy waste considering the cost per gallon. Actually I want to to try laying up with pre-preg, but have concerns about the short shelf life.
#11
Re: SOHC D-Series VTEC Timing Cover mold construction
I primarily wet lay up too. Infusion does however make better parts. Much less pooling around the radius in tight corners and such. Infusion works well for small parts.
Ooa prepreg is nice too! There are a couple places that sell drops at a reasonable price.
Ooa prepreg is nice too! There are a couple places that sell drops at a reasonable price.
#12
Honda-Tech Member
Thread Starter
Re: SOHC D-Series VTEC Timing Cover mold construction
After fighting multiple bag leaks we were able to get the first part laid up successfully. Here is the part popped from the mold moments ago....
#CarbonFiberTimingCover #SOHCVTEC #Dseries #D16 #HatchElite #TenByTenCustomCarbon #CustomCarbonFiber<br/>So Fresh and so Clean popped right from the mold minutes ago....<br/>More to come.<br/>
#CarbonFiberTimingCover #SOHCVTEC #Dseries #D16 #HatchElite #TenByTenCustomCarbon #CustomCarbonFiber<br/>So Fresh and so Clean popped right from the mold minutes ago....<br/>More to come.<br/>
Just needs a little finishing and trimming, pics to come..
#CarbonFiberTimingCover #SOHCVTEC #Dseries #D16 #HatchElite #TenByTenCustomCarbon #CustomCarbonFiber<br/>So Fresh and so Clean popped right from the mold minutes ago....<br/>More to come.<br/>
#CarbonFiberTimingCover #SOHCVTEC #Dseries #D16 #HatchElite #TenByTenCustomCarbon #CustomCarbonFiber<br/>So Fresh and so Clean popped right from the mold minutes ago....<br/>More to come.<br/>
Just needs a little finishing and trimming, pics to come..
#14
Honda-Tech Member
Thread Starter
Re: SOHC D-Series VTEC Timing Cover mold construction
#CarbonFiberTimingCover #SOHCVTEC #Dseries #D16 #HatchElite #TenByTenCustomCarbon #CustomCarbonFiber
#CarbonFiberTimingCover #SOHCVTEC #Dseries #D16 #HatchElite #TenByTenCustomCarbon #CustomCarbonFiber
#CarbonFiberTimingCover #SOHCVTEC #Dseries #D16 #HatchElite #TenByTenCustomCarbon #CustomCarbonFiber
#16
Honda-Tech Member
iTrader: (3)
Join Date: Jul 2003
Location: 808 state
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
Re: SOHC D-Series VTEC Timing Cover mold construction
Wow that's nice! Any chance you could make one with a hole cut out to adjust cam gear? Rather have it cut prior to final glass or what ever the process is.. Thanks
#18
Re: SOHC D-Series VTEC Timing Cover mold construction
What resin system are you using??? I have a bagging material that is stretchy, can handle 200 degrees and be used multiple times. I can get usually 5-6 pulls out of one envelope bag. Saved tons of money not wasting tacky tape and film. If you are interested I will send you a couple yards to play with.
#21
Honda-Tech Member
Thread Starter
Re: SOHC D-Series VTEC Timing Cover mold construction
Dallas: We use West System Epoxy Resin and the Special Clear Hardener.
Underrated: yes, we can do that
LVP: Thank You
Rice burner: selectively we do make parts for others as our time allows.
Underrated: yes, we can do that
LVP: Thank You
Rice burner: selectively we do make parts for others as our time allows.
Thread
Thread Starter
Forum
Replies
Last Post
civiconboost
Honda Civic / Del Sol (1992 - 2000)
5
07-26-2002 04:54 AM