manifold fabricating questions
#1
I'm really 2slow
Thread Starter
manifold fabricating questions
Is that inner lip or whatever you call it ok there when welding. or should I shave it off?
What size filler rods are you guys using? This manifold will be done with sch. 40 SS. My welder said he could backpurge it for me, if that matters.
Which runners are paired and in what order?? too lazy to search.
thanks,Surge
What size filler rods are you guys using? This manifold will be done with sch. 40 SS. My welder said he could backpurge it for me, if that matters.
Which runners are paired and in what order?? too lazy to search.
thanks,Surge
#7
I'm really 2slow
Thread Starter
Re: (G2turbo_terror)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by G2turbo_terror »</TD></TR><TR><TD CLASS="quote">that "lip" is a bevel, do not remove it.</TD></TR></TABLE>ok, great! thanks man I still have more ? than answers One more thing. How close do the pieces need to be for welding? I am guessing no gap, but what do I know
Trending Topics
#10
I'm really 2slow
Thread Starter
Re: (vtecspeed1320)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecspeed1320 »</TD></TR><TR><TD CLASS="quote">reel you off some .030 mig wire and gap it with that. </TD></TR></TABLE>sounds good D
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by m R g S r »</TD></TR><TR><TD CLASS="quote">Removing the bevel would be baddd!!!
That helps with penetration on the first pass!
</TD></TR></TABLE>what about when I need to cut an elbow and the bevel is gone on one side?? am I phucked then?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by m R g S r »</TD></TR><TR><TD CLASS="quote">Removing the bevel would be baddd!!!
That helps with penetration on the first pass!
</TD></TR></TABLE>what about when I need to cut an elbow and the bevel is gone on one side?? am I phucked then?
#15
Shooting Star
Join Date: Jan 2006
Location: The Lou, MO, US
Posts: 4,408
Likes: 0
Received 0 Likes
on
0 Posts
Re: manifold fabricating questions (hootiehoo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hootiehoo »</TD></TR><TR><TD CLASS="quote">ok, put down the parts.
back away from the car.
buy a spoiler.
call it a day.</TD></TR></TABLE>
haha if you only knew what this manifold was going on.<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PSI2HI »</TD></TR><TR><TD CLASS="quote">Yeah, seems as if your in a little over your head on this project based off the questions being asked.</TD></TR></TABLE>everyone might have been a little over their head when they first started...give him guidiance
back away from the car.
buy a spoiler.
call it a day.</TD></TR></TABLE>
haha if you only knew what this manifold was going on.<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PSI2HI »</TD></TR><TR><TD CLASS="quote">Yeah, seems as if your in a little over your head on this project based off the questions being asked.</TD></TR></TABLE>everyone might have been a little over their head when they first started...give him guidiance
#16
I'm really 2slow
Thread Starter
Re: manifold fabricating questions (vtecspeed1320)
I just heard the bell ring, someone's gonna get schooled!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecspeed1320 »</TD></TR><TR><TD CLASS="quote">
haha if you only knew what this manifold was going on.everyone might have been a little over their head when they first started...give him guidiance
</TD></TR></TABLE>Agreed!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecspeed1320 »</TD></TR><TR><TD CLASS="quote">
haha if you only knew what this manifold was going on.everyone might have been a little over their head when they first started...give him guidiance
</TD></TR></TABLE>Agreed!
#17
I'm really 2slow
Thread Starter
Re: (PSI2HI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PSI2HI »</TD></TR><TR><TD CLASS="quote">Yeah, seems as if your in a little over your head on this project based off the questions being asked.</TD></TR></TABLE>I'd rather ask questions and do it right the first time then not ask questions and do it twice
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hootiehoo »</TD></TR><TR><TD CLASS="quote">ok, put down the parts.
back away from the car.
buy a spoiler.
call it a day.</TD></TR></TABLE>I wish building a car was that easy
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hootiehoo »</TD></TR><TR><TD CLASS="quote">ok, put down the parts.
back away from the car.
buy a spoiler.
call it a day.</TD></TR></TABLE>I wish building a car was that easy
#18
Honda-Tech Member
Join Date: Feb 2004
Location: Tampa, FL
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
Re: (2fast4u831)
are you going to try welding or is this your buddy?
if he knows how to weld, he should be able to answer all of your questions. if he doesn't, you probably don't want him welding anything for you.
if he knows how to weld, he should be able to answer all of your questions. if he doesn't, you probably don't want him welding anything for you.
#20
Honda-Tech Member
Join Date: Jul 2004
Location: I'm everywhere Focker
Posts: 5,463
Likes: 0
Received 2 Likes
on
2 Posts
Re: manifold fabricating questions (vtecspeed1320)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecspeed1320 »</TD></TR><TR><TD CLASS="quote">
haha if you only knew what this manifold was going on.
</TD></TR></TABLE>
SO, why keep secrets?
haha if you only knew what this manifold was going on.
</TD></TR></TABLE>
SO, why keep secrets?
#24
Shooting Star
Join Date: Jan 2006
Location: The Lou, MO, US
Posts: 4,408
Likes: 0
Received 0 Likes
on
0 Posts
Re: manifold fabricating questions (2fast4u831)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2fast4u831 »</TD></TR><TR><TD CLASS="quote">lol. no secrets. stroked h22 with b series trans. build thread in my sig. </TD></TR></TABLE>liar...its a 2jz powered ep3 with a d15b tranny, and d13 throttle body.
Thread
Thread Starter
Forum
Replies
Last Post