Just some fab work completed this week
08-13-2006, 08:44 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: 860, ct, usa
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
Just some fab work completed this week
i just wanted to post some pics of last weeks projects that we were working on. we are still not selling anything so please do no take this as an add simply just a post to show the quality of our work and to fix the little negativity that we had in the past. constructive criticism welcome.
this is a very basic setup
topmount
57 trim xspower
38mm wg
450s
3 inch dp
2.5 inch aluminum charge piping
greddy rs bov
28x9x3 eBay cooler
and just some more to show quality
this is a very basic setup
topmount
57 trim xspower
38mm wg
450s
3 inch dp
2.5 inch aluminum charge piping
greddy rs bov
28x9x3 eBay cooler
and just some more to show quality
)
08-14-2006, 09:58 AM
#5
The Boot
Join Date: Dec 2001
Location: Arizona, US
Posts: 9,841
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just some fab work completed this week (erebunicrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by erebunicrx »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>with the motor rocking and all would the turbo rub? Looks close.
deffinately looks like quality stuff.
</TD></TR></TABLE>with the motor rocking and all would the turbo rub? Looks close.
deffinately looks like quality stuff.
08-14-2006, 01:16 PM
#6
Honda-Tech Member
Join Date: Jul 2004
Location: I'm everywhere Focker
Posts: 5,463
Likes: 0
Received 2 Likes
on
2 Posts
Since this is merely a show-the-work thread...give up some TIG settings on the runners of that ramhorn.
Tung dia, filler dia, amps per pass (root, fill), argon flow rate...etc.
Very nice ramhorn and topmount setup....absolute **** by metal!
Tung dia, filler dia, amps per pass (root, fill), argon flow rate...etc.
Very nice ramhorn and topmount setup....absolute **** by metal!
Trending Topics
08-15-2006, 04:25 AM
#9
Honda-Tech Member
Join Date: Aug 2004
Location: Mechanicsville VA
Posts: 2,318
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TurboSI56)
looks pretty good
I think the turbo could be further back from the radiator support though.
I would like to see some pics of the inside of the runners of the penetration
I think the turbo could be further back from the radiator support though.
I would like to see some pics of the inside of the runners of the penetration
08-19-2006, 11:14 AM
#14
Honda-Tech Member
Join Date: Jul 2004
Location: I'm everywhere Focker
Posts: 5,463
Likes: 0
Received 2 Likes
on
2 Posts
Re: Just some fab work completed this week (erebunicrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by erebunicrx »</TD></TR><TR><TD CLASS="quote">...we are still not selling...do no take this as an add simply just a post to show the quality of our work...
</TD></TR></TABLE>
Then came.........
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RC000E »</TD></TR><TR><TD CLASS="quote">Since this is merely a show-the-work thread...give up some TIG settings on the runners of that ramhorn.
Tung dia, filler dia, amps per pass (root, fill), argon flow rate...etc.
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BoostedEG6 »</TD></TR><TR><TD CLASS="quote">
I would like to see some pics of the inside of the runners of the penetration
</TD></TR></TABLE>
Yet, no response still. Seems like a thread made to "go to work". OP's usually return to respond to various comments, not just let the pictures work their magic on newbies with cash in their pocket.
Hope this isn't the case.
</TD></TR></TABLE>
Then came.........
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RC000E »</TD></TR><TR><TD CLASS="quote">Since this is merely a show-the-work thread...give up some TIG settings on the runners of that ramhorn.
Tung dia, filler dia, amps per pass (root, fill), argon flow rate...etc.
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BoostedEG6 »</TD></TR><TR><TD CLASS="quote">
I would like to see some pics of the inside of the runners of the penetration
</TD></TR></TABLE>
Yet, no response still. Seems like a thread made to "go to work". OP's usually return to respond to various comments, not just let the pictures work their magic on newbies with cash in their pocket.
Hope this isn't the case.
08-19-2006, 05:18 PM
#17
Honda-Tech Member
Join Date: Jul 2004
Location: I'm everywhere Focker
Posts: 5,463
Likes: 0
Received 2 Likes
on
2 Posts
Re: (erebunicrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by erebunicrx »</TD></TR><TR><TD CLASS="quote">josh already replied with settings. it got deleted.</TD></TR></TABLE>
Why?
Can anyone, preferrably the mod who deleted explain? Why can't settings be posted? Surely that isn't the whole story.
Erebuni...by the way. Did you just use the two bungs that are welded to the top of those intercooler cores by bolting it directly to the top wall of the bumper itself. It's hard to tell in the picture, but it appears like a hole was cut and it was just mounted directly to the top.
Why?
Can anyone, preferrably the mod who deleted explain? Why can't settings be posted? Surely that isn't the whole story.
Erebuni...by the way. Did you just use the two bungs that are welded to the top of those intercooler cores by bolting it directly to the top wall of the bumper itself. It's hard to tell in the picture, but it appears like a hole was cut and it was just mounted directly to the top.
08-20-2006, 10:51 AM
#20
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: 860, ct, usa
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RC000E)
everything that josh writes gets deleted.
we did not do the intercooler mounting so i could not tell you. all we did was manifold and pipings and install. the person come to us with the cooler already mounted.
we did not do the intercooler mounting so i could not tell you. all we did was manifold and pipings and install. the person come to us with the cooler already mounted.
08-20-2006, 10:53 AM
#21
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: 860, ct, usa
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
Re: (W O T)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by W O T »</TD></TR><TR><TD CLASS="quote">Because erbunicrx = CC-fab
CC-fab = ongoing scams</TD></TR></TABLE>
im not sure where you came up with that.?.?
i work for cc-fab. josh and coreyr are owners of it. there are not ongoing scams nor were there ever. just people waited longer then they should have when josh was doing all of the work by himself in his garage.
CC-fab = ongoing scams</TD></TR></TABLE>
im not sure where you came up with that.?.?
i work for cc-fab. josh and coreyr are owners of it. there are not ongoing scams nor were there ever. just people waited longer then they should have when josh was doing all of the work by himself in his garage.
08-20-2006, 10:00 PM
#22
Honda-Tech Member
iTrader: (3)
Join Date: Mar 2003
Location: sO cAl
Posts: 3,409
Likes: 0
Received 0 Likes
on
0 Posts
Re: (erebunicrx)
id be ashamed to say i work for ccfab. Hotrex is a racist douchebag that still lives with his momy and literally has herpes. Enjoy your career
08-20-2006, 11:45 PM
#23
Trial User
Join Date: Jan 2005
Location: So Cal
Posts: 1,479
Likes: 0
Received 0 Likes
on
0 Posts
Re: (O.G.RENR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by O.G.RENR »</TD></TR><TR><TD CLASS="quote">id be ashamed to say i work for ccfab. Hotrex is a racist douchebag that still lives with his momy and literally has herpes. Enjoy your career</TD></TR></TABLE>
08-21-2006, 12:11 AM
#24
Re: (RC000E)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RC000E »</TD></TR><TR><TD CLASS="quote">
Why?
Can anyone, preferrably the mod who deleted explain? Why can't settings be posted? Surely that isn't the whole story.
Erebuni...by the way. Did you just use the two bungs that are welded to the top of those intercooler cores by bolting it directly to the top wall of the bumper itself. It's hard to tell in the picture, but it appears like a hole was cut and it was just mounted directly to the top.</TD></TR></TABLE>
yes he mounted it directly to the to the bumper support.
as for settings if i remember correctly
3/32 tungsten
1/16 316 filler (might have been 309 on that one)
100A root 90A filler
gas was 20ish CFH
hope that helps
as for why it was deleted: hes IP banned so hes not supposed to be posting
Why?
Can anyone, preferrably the mod who deleted explain? Why can't settings be posted? Surely that isn't the whole story.
Erebuni...by the way. Did you just use the two bungs that are welded to the top of those intercooler cores by bolting it directly to the top wall of the bumper itself. It's hard to tell in the picture, but it appears like a hole was cut and it was just mounted directly to the top.</TD></TR></TABLE>
yes he mounted it directly to the to the bumper support.
as for settings if i remember correctly
3/32 tungsten
1/16 316 filler (might have been 309 on that one)
100A root 90A filler
gas was 20ish CFH
hope that helps
as for why it was deleted: hes IP banned so hes not supposed to be posting
08-21-2006, 12:17 AM
#25
Re: Just some fab work completed this week (Smokinsax)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Smokinsax »</TD></TR><TR><TD CLASS="quote">with the motor rocking and all would the turbo rub? Looks close.
deffinately looks like quality stuff. </TD></TR></TABLE>
its not as close as it looks.its close but doesnt hit at all.
deffinately looks like quality stuff.
</TD></TR></TABLE>its not as close as it looks.its close but doesnt hit at all.