Honda-Tech Breather Box/Catch can/breather box thread.
#76
Honda-Tech Member
Re: Honda-Tech Breather Box/Catch can/breather box thread.
nice. i wouldnt trust myself welding inside the vc though. something falls off and ruins my head
#79
Honda-Tech Member
Re: Honda-Tech Breather Box/Catch can/breather box thread.
this is one of the best breather/catch setup threads ive seen in a long time....i am now in the market for a 6 port -10AN 1 gallon setup......
#82
Honda-Tech Member
Re: Honda-Tech Breather Box/Catch can/breather box thread.
#84
Re: Honda-Tech Breather Box/Catch can/breather box thread.
Everybody does either the two plug on each side of the oil filter (and plug the oem nipple breather + the oem breather hole <or use the oem breather as a drain back ) and some add vc breather as well or not or a combo of both ! Anyway, confused yet lol !!
OK now what about using the oem nipple and oem breather hole and run two lines (out of the oem hole+nipple )to the catch can instead , this would work right?Could not be worst than the oem breather !
OK now what about using the oem nipple and oem breather hole and run two lines (out of the oem hole+nipple )to the catch can instead , this would work right?Could not be worst than the oem breather !
#87
Honda-Tech Member
Join Date: Jun 2002
Location: oklahoma city, ok, USA
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda-Tech Breather Box/Catch can/breather box thread.
does anybody know what car to get a freeze plug for so i can plug the factory catch can hole?
#88
I'm really 2slow
Re: Honda-Tech Breather Box/Catch can/breather box thread.
#89
Honda-Tech Member
Join Date: Aug 2007
Location: green bay, wisconsin, usa
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda-Tech Breather Box/Catch can/breather box thread.
Heres my first one where I didn't **** up any of the welds too bad. Not done yet, there is a perforated piece of metal about 5/8" down from the top. Where is the Cheapest place to get AL AN fittings?
#91
Honda-Tech Member
Join Date: Apr 2002
Location: va, USA
Posts: 657
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda-Tech Breather Box/Catch can/breather box thread.
I made this a couple of years ago.
Prayoonto Racing Turbo Integra:
Made a box
-welded -AN fittings on the valve cover
-Mocked up the box for mounting points and for the -AN fittings
Done....
Prayoonto Racing All Motor Civic:
-AN fittings on the back of the Valve cover
Rolled a piece of aluminum/made it kinda big so we wouldn't have to drain it until after the race.
Done
Installed.... also now its on the other side due to our new Gangsta Lean setup.
Made this for my s2000 AE86 a couple years ago to
Coolant Overflow Tank
Installed
coolant full also to set at highest point to help with getting rid of air pockets.
Prayoonto Racing Turbo Integra:
Made a box
-welded -AN fittings on the valve cover
-Mocked up the box for mounting points and for the -AN fittings
Done....
Prayoonto Racing All Motor Civic:
-AN fittings on the back of the Valve cover
Rolled a piece of aluminum/made it kinda big so we wouldn't have to drain it until after the race.
Done
Installed.... also now its on the other side due to our new Gangsta Lean setup.
Made this for my s2000 AE86 a couple years ago to
Coolant Overflow Tank
Installed
coolant full also to set at highest point to help with getting rid of air pockets.
Last edited by LD_EGSICK; 04-16-2013 at 02:36 PM.
#92
Honda-Tech Member
Thread
Thread Starter
Forum
Replies
Last Post
brenden747
Honda Civic / Del Sol (1992 - 2000)
4
10-04-2011 08:30 AM