TMC_EF

Has any one done this , What do i need to make one

Bakeoff

get a big roll of garden edging, some self tapping sheet metal screws with hex heads, and you're ready to go.
Trim it to whatever length you need and screw away...
That's what I did and it works great. You might need something to support the center, cause once you get about 45mph, mine started to fold. I used some L brackets to support it. This year I'm thinking of sliding a rod into the round lip at the bottom to support it so it can't flex.

GarageAlchemist

i have the hd lip on my ef, works great except the edges are bending a bit, was thinking of just some flat metal stock, just how to do it so it looks clean and seamless is the tricky part

093turbo16

iTrader: (2)

SinisterCRX

I'm doing the same to my Supra when I get it

Home Depot FTW