NY NY/NJ - 1989 (EF) Civic Drag Car for Sale and Part Out

Closed Thread Subscribe

Thread Tools

Search this Thread

11-05-2012, 09:16 AM

0xenocron

Thread Starter

Join Date: Aug 2002

Location: Hillburn, NY, USA

Posts: 5,724

Likes: 0

Received 1 Like on 1 Post

NY/NJ - 1989 (EF) Civic Drag Car for Sale and Part Out

Would prefer to sell complete for obvious reasons, but I will part out the main items...no small items will come off the chassis unless someone wants to buy the rolling shell, and then I will get rid of the small items if a sale happens on the roller.

105mm x 90mm Drag Cartel Motor
- Bensen Sleeved Block
- ACL Coated Race Bearings
- Saenz Rods
- Custom Cartel JE Pistons
- BC Crank
- Cartel Ported Head Package
- Single Lobe Stage 5 Cartel Cams
- Ferrea Roller Rocker Setup
- Supertech Valves and Valvetrain
- meticulously assembled by Jose Bello, machine work by Olsen's Engines
$10k new, Sell for $7900

DTR/SSR Custom Megaphone Header for K24 in EF Civic
- $1100 new, $800 sell

Frana/Headway Performance 5 Speed All Motor Dog Box
- includes factory Case and all parts of trans (sliders, shift selector, etc), bolt in ready, will be completely assembled
- includes Mfactory Helical LSD
$6500 new, Sell for $4800

Comp Clutch "B" Plate Twin Disc (8037, K-Series)
$1150 new, Sell for $700

$25,000 - Car Complete Includes all of the above and the following (will not part out any of the below parts, sold only complete)
- 1989 Civic DX Hatch back, 80,000 original chassis miles before tuned into a race car, recently painted Cadillac Pearl White
- Exospeed Closed Fiberglass 3 Piece Front End
- 5 Point Cage installed by Synapse Motorsports
- Racepak Logger Dash for Haltech Engine Management Systems
- Innovate MTX-L Wideband
- Haltech 4 Channel EGT Amplifier and Sensor Setup
- Full Race-Spec Vehicle Wiring Program, Engine Harness, Cabin Harness, Battery/Charge Harness, Lights, Relay/Fuse Box, Switch Panel, etc
- Haltech Platinum Sport 2000 ECU including tunes and log files for Ignite Red Ethanol or VP Q16 Fuels
- Sensors for Fuel Pressure, Oil Pressure and Ground Speed (Rear Wheel Speed) along with all necessary EFI Sensors
- Fuel System, Injector Dynamics 1000cc Injectors w/ Bosch 044 Fuel Pump and 1 Gallon Fuel Cell
- Rywire Custom Tucked Radiator Setup
- TurboStart 16 volt battery setup
- 12an Coolant Lines with Meziere Pump and K-Tuned Race Plate
- PIC Performance Drag Coilover Suspension, 16k Front, 12k Rear
- K-Tuned Front Traction Bar with custom weight bar setup
- Solid Spherical Bearing Front Lower Control Arm setup
- Skunk2 Aluminum Rear Lower Control Arms, Skunk2 Front Adjustable Camber Kit
- Hasport K-Series EF Mounts

Rolling Chassis only (vehicle with cage, suspension, hood and 3 piece front) - $7,500
- includes factory dash, drivers seat with 5 point harness

Im sure there is more…of course you will have any help or service after the sale you may need if you purchase the complete car including tuning for a full year and track support if local in the area. There are probably 15 passes total at the track this year (most likely less) and maybe 20 pulls on the dyno on this current setup. Car has run 10.5x @ 128+ mph consistently now with more in it for certain. Car ran 10.17 @ 130mph this past weekend at Englishtown (11/25)

*Prices do not include Paypal or any Delivery or Shipping Fees

**If you would like a shipping quote, I need your FULL Address to do so.

***Anyone looking to purchase internationally, we can ship ANY of these parts including the car. Any international sales at these price levels would require you pay with a Wire Transfer or Western Union Payment however...no exceptions.

****I do not get to check my PMs here all that often, so I would prefer you email me "xenocron -at- gmail DOT com" with questions so I can get back to you more easily and our back and forth conversation can be more easily remembered and tracked

Car and all parts are located in Hillburn, NY 10931...right now everything is TOGETHER and running if you would like to see anything in person. I will deliver the complete car if you go that route anywhere within 200 miles of the zip code above, including a Port for Shipping overseas if needed. This is my PERSONAL vehicle, so this has nothing to do with my tuning or parts business. Payment methods I will take are Cash, Bank Certified Check, Wire Transfer, Paypal Personal Gift or Confirmed Paypal Account with Confirmed Shipping Address (you pay fees). I do not want ANY trades thank you.

Right now prices are firm and non negotiable unless you want to purchase TWO of anything, then I will knock something off to help you out. Other offers will not be entertained, I am not desperate and these are all priced to sell as is.

I will add some pictures of the car as I can below this sentence.