PA FS/FT 2005 RSX Type S, k20/k24 Kmod Built
08-02-2012, 06:08 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2007
Location: Pittsburgh, Pa, Usa
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
FS/FT 2005 RSX Type S, k20/k24 Kmod Built **UPDATED WITH MORE PICS**
***UPDATE, MOTOR HAS MADE 301 WHP 208 TRQ. MOTOR IS IN, CAR RUNS AND DRIVES AND IS READY TO SELL ***
**LOOKING FOR TRADES PLUS CASH ON YOUR END!!**
****Price update 15k firm****
2005 Acura RSX Type S
Car has about 70k on the body. Had Kmod performance, www.kmodperformance.com build me their stage 2 crate engine. I drove all the way from Pittsburgh pa to them to have them tune it. I made 220 whp and 197 trq on a dynojet. Decided i wanted to go bigger. Sooo we tore the motor back out and sent it back to Kmod again for bigger upgrades.
Its currently being built with them right now.
The build:
K20 head
-Kmod Ported
-Supertech springs and titanium retainers
-BC stage 3 cams
-ARP head studs
-Cometic head gasket
-RBC Intake manifold
-Skunk 2 70mm throttlebody
-Skunk 2 Fuel rail
-Acura RDX injectors
K24 Block
-ACL Race rod/main bearings
-Supertech 12-1 Pistons
-Eagle Rods
-Kmod k20a2 oil pump and pan
*Precision honed cylinders
*Precision balanced rotating assembly
*Precision checked/set bearing clearance
I have about 8K into the motor build itself at this point.
Exhaust:
-Skunk 2 Megapower RR 3"
-Skunk 2 Megapower race header
Motor Mounts:
Innovative
Suspension:
-Tein Flex full coil overs
Wheels:
civic Si wheels painted black with good Nitto Neo gens on them
There is other things you probably dont care about like Skunk 2 weighted shift ****, clean black interior, Brand new Stop Tech brake pads and rotors all around. ect
I owe about 3500 on the car so my pay off would need to be included in the trade
If you are interested lmk Heres a pic of it with my old type s wheels, and a pic most recently with the black si wheels at Kmod in NC
**Also i want to be very clear. The motor made 301 with a gato intake manifold (not installed), Asp header (not installed) and on e85 (Its on pump gas.) I will be getting a retune on pump gas in a few weeks and expect 270 whp
**LOOKING FOR TRADES PLUS CASH ON YOUR END!!**
****Price update 15k firm****
2005 Acura RSX Type S
Car has about 70k on the body. Had Kmod performance, www.kmodperformance.com build me their stage 2 crate engine. I drove all the way from Pittsburgh pa to them to have them tune it. I made 220 whp and 197 trq on a dynojet. Decided i wanted to go bigger. Sooo we tore the motor back out and sent it back to Kmod again for bigger upgrades.
Its currently being built with them right now.
The build:
K20 head
-Kmod Ported
-Supertech springs and titanium retainers
-BC stage 3 cams
-ARP head studs
-Cometic head gasket
-RBC Intake manifold
-Skunk 2 70mm throttlebody
-Skunk 2 Fuel rail
-Acura RDX injectors
K24 Block
-ACL Race rod/main bearings
-Supertech 12-1 Pistons
-Eagle Rods
-Kmod k20a2 oil pump and pan
*Precision honed cylinders
*Precision balanced rotating assembly
*Precision checked/set bearing clearance
I have about 8K into the motor build itself at this point.
Exhaust:
-Skunk 2 Megapower RR 3"
-Skunk 2 Megapower race header
Motor Mounts:
Innovative
Suspension:
-Tein Flex full coil overs
Wheels:
civic Si wheels painted black with good Nitto Neo gens on them
There is other things you probably dont care about like Skunk 2 weighted shift ****, clean black interior, Brand new Stop Tech brake pads and rotors all around. ect
I owe about 3500 on the car so my pay off would need to be included in the trade
If you are interested lmk Heres a pic of it with my old type s wheels, and a pic most recently with the black si wheels at Kmod in NC
**Also i want to be very clear. The motor made 301 with a gato intake manifold (not installed), Asp header (not installed) and on e85 (Its on pump gas.) I will be getting a retune on pump gas in a few weeks and expect 270 whp
Last edited by LSVTEC426; 04-04-2013 at 08:02 AM.
Trending Topics
08-07-2012, 08:14 PM
#14
Honda-Tech Member
Thread Starter
Join Date: Mar 2007
Location: Pittsburgh, Pa, Usa
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/FT 2005 RSX Type S, k20/k24 Kmod Built
That's what I'm talking about. Thanks guys, now let's get this sold!! I'll put it back to stock, sell with the built motor, or trade for an ls1 car plus cash. Definitely willing to hear trade offers plus cash
