TN 1996 Midori Green Hatch
11-06-2009, 07:53 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2008
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
1996 Midori Green Hatch
6.5k no less, I will part in about a month and make more money if I do not get a taker.
Car is south of Nashville in Spring Hill, TN
Here is a pretty rare opportunity for someone who can appreciate this car which turns heads everywhere I take it and has never given me problems and is a BLAST to drive also it is a 1996 CX model which means it is the lightest ek hatch made with no annoying rear wiper.
I bought it in May of 06 (original thread http://www.hondamarketplace.co...16010). I have added a lot to the car and put 16k miles on it since then it was always garage kept and has probably only been driven 10 times since last May when I bought a dd car. I am firm on the price because I am in NO hurry to sell for a lot of reasons the only trade I would consider is a S2000 and money on my part.
Modifications.
Exterior
Original Paint in good shape except a few scratches
Real SIR lip
Antennae block off plate
Bumper plugs up front
Black Emblems
VIS C/F duckbill
Painted Side Skirts/Trim/Door Handles
Spoon replica mirrors
Interior
SI cluster (actual mileage 185,xxx)
Yellow Stitch Boot
Buddy Club ****
Broadway Mirror
No CD player I have both holes blocked off with carbon fiber but the factory plug is still there.
Kenwood speakers all around
Clean DC2 Seats
Momo wheel
Momo Hub
Circuit Hero shifter externsion
Suspension/Wheels
16 inch custom painted 5zigen fnor-c with mint Falken Azenis)
Tokico Illuiminas
Ground Control Coilovers (custom rates)
Ground Control Extended Top Hats on all 4 corners
ASR Sub Frame Brace
SI Rear Sway Bar
Neuspeed Upper Front and Rear Tie Bars (solid pieces)
Engine
B16a2 with about 70k on it
EX harness used so no splicing
GSR Cams (was gonna boost)
Custom completely shaved valve cover plus a spare
Apexi World Sport Exhaust
ACT pressure plate
ACT pro lite flywheel
ACT heavy duty clutch (hope you have a strong leg)
Prothane shifter bushings
AEM ITR application CAI (nice)
Chipped p28 with an obd-1 conversion.
Other
Front and Rear disc swap with steel braided lines included not yet installed
No A/C
Also want to the throw in James aka "Ventolin" took a photo of this car that was in Honda Tuning so its a magazine car
Car is south of Nashville in Spring Hill, TN
Here is a pretty rare opportunity for someone who can appreciate this car which turns heads everywhere I take it and has never given me problems and is a BLAST to drive also it is a 1996 CX model which means it is the lightest ek hatch made with no annoying rear wiper.
I bought it in May of 06 (original thread http://www.hondamarketplace.co...16010). I have added a lot to the car and put 16k miles on it since then it was always garage kept and has probably only been driven 10 times since last May when I bought a dd car. I am firm on the price because I am in NO hurry to sell for a lot of reasons the only trade I would consider is a S2000 and money on my part.
Modifications.
Exterior
Original Paint in good shape except a few scratches
Real SIR lip
Antennae block off plate
Bumper plugs up front
Black Emblems
VIS C/F duckbill
Painted Side Skirts/Trim/Door Handles
Spoon replica mirrors
Interior
SI cluster (actual mileage 185,xxx)
Yellow Stitch Boot
Buddy Club ****
Broadway Mirror
No CD player I have both holes blocked off with carbon fiber but the factory plug is still there.
Kenwood speakers all around
Clean DC2 Seats
Momo wheel
Momo Hub
Circuit Hero shifter externsion
Suspension/Wheels
16 inch custom painted 5zigen fnor-c with mint Falken Azenis)
Tokico Illuiminas
Ground Control Coilovers (custom rates)
Ground Control Extended Top Hats on all 4 corners
ASR Sub Frame Brace
SI Rear Sway Bar
Neuspeed Upper Front and Rear Tie Bars (solid pieces)
Engine
B16a2 with about 70k on it
EX harness used so no splicing
GSR Cams (was gonna boost)
Custom completely shaved valve cover plus a spare
Apexi World Sport Exhaust
ACT pressure plate
ACT pro lite flywheel
ACT heavy duty clutch (hope you have a strong leg)
Prothane shifter bushings
AEM ITR application CAI (nice)
Chipped p28 with an obd-1 conversion.
Other
Front and Rear disc swap with steel braided lines included not yet installed
No A/C
Also want to the throw in James aka "Ventolin" took a photo of this car that was in Honda Tuning so its a magazine car
Thread
Thread Starter
Forum
Replies
Last Post
Deano_D aka "Brick Top"
Vehicles for sale
39
05-02-2008 08:15 PM
