NM 1991 CRX Si Rolling Shell with JDM EF8 conversion, S2000 seats, etc....
#1
Honda-Tech Member
Thread Starter
1991 CRX Si Rolling Shell with JDM EF8 conversion, S2000 seats, etc....
**********SOLD***********
This is just a SHEL! engine bay is satin black and all OEM. All parts below are low mileage, or within 3,000 miles since install. final price drop before i ***** it out on eBay...
*clean NM Title in hand*
Call or text me at 505.45 zero 7 zero 8 five
maxwellduryea at gmail dot com
Car really needs another spray of NH-538 Frost White for it to be back to mint shape. No exhaust, no seats, and no cluster or wheels (have some to roll it onto a trailer, but keeping them, sorry)....everything else is there as it is in the pics. The wheels im keeping, the seats and cluster have been sold, and the exhaust must have been stolen as its no longer on there....****** thieves.
Full JDM SiR EF8 front end conversion*
OEM Honda EF8 front bumper cover
JDM SiR EF8 radiator support & t`bar
JDM SiR EF8 Fenders
SiR carbon fiber VIS Racing hood
JDM SiR EF8 Plastic Stanley SiR headlights, SiR amber corners, and clear turn signals
EK clear fender markers by DEPO
OEM Honda EF8 mudflaps
Spoon Replica mirrors
Replica EF8 DOHC VTEC side door decals
AVITAL Alarm system
Tein S-Tech lowering springs and OEM struts
10.3" Integra DA front brakes, Rears are stock Si discs with Hawk HPS pads and Brembo slotted/drilled discs, Stainless Russel brake lines, and new OEM Honda rear wheel hubs/bearings, ARP rear studs
40/40 Integra proportioning valve & New OEM 15/16" Civic EX master cylinder
Energy rear trailing arm bushings, front sway bar bushings, front endlink bushings, rear sway bar bushings, etc.
Honda OEM steering rack bushings, endlinks, hardware and OEM boots
Blox purple anodized rear lower control arms. Brand new, just installed. (OEM LCA's also included)
All new OEM Honda CRX weatherstripping and window channels replaced when sprayed Frost White. All new door sash's and new window sils on the exterior. All replaced with OEM Honda parts. (these are discontinued and hard to find. $1,000 worth of moldings alone...)
OEM JDM EF8 SiR rear interior
S2000 Sun Visors custom fitted, Acura LEGEND rearview mirror, and Black tweed recovered headliner
JDM EF8 AirCon climate control unit
JDM GATHERS cassette player and AUX cord
CUSTOM single din console with CUPHOLDERS!
Custom red carpet. CTR colour, custom batch made. Also, S2000 Pedals and dead pedal!
Custom power window setup with OEM single action switches and OEM cranks/motors. Looks clean and works perfectly.
New seatbelts were just installed last summer at the dealership per Hondas "free seatbelt replacement for life" guarantee. The belts retract perfectly and don't sag.
All black dyed interior. Done professionally at Quanz Automotive with SEM Landau Black using Bulldog adhesive promoter. Dash is crack-free. Door speaker covers had usual cracks and the door panels are not mint, but in good shape.
Custom modified Civic EK armrest with matching leather e-brake handle
Add up all the parts yourself.....
Asking $2,500 as is or $1,500 for the rolling shell without any of the JDM parts or exhaust
This is just a SHEL! engine bay is satin black and all OEM. All parts below are low mileage, or within 3,000 miles since install. final price drop before i ***** it out on eBay...
*clean NM Title in hand*
Call or text me at 505.45 zero 7 zero 8 five
maxwellduryea at gmail dot com
Car really needs another spray of NH-538 Frost White for it to be back to mint shape. No exhaust, no seats, and no cluster or wheels (have some to roll it onto a trailer, but keeping them, sorry)....everything else is there as it is in the pics. The wheels im keeping, the seats and cluster have been sold, and the exhaust must have been stolen as its no longer on there....****** thieves.
Full JDM SiR EF8 front end conversion*
OEM Honda EF8 front bumper cover
JDM SiR EF8 radiator support & t`bar
JDM SiR EF8 Fenders
SiR carbon fiber VIS Racing hood
JDM SiR EF8 Plastic Stanley SiR headlights, SiR amber corners, and clear turn signals
EK clear fender markers by DEPO
OEM Honda EF8 mudflaps
Spoon Replica mirrors
Replica EF8 DOHC VTEC side door decals
AVITAL Alarm system
Tein S-Tech lowering springs and OEM struts
10.3" Integra DA front brakes, Rears are stock Si discs with Hawk HPS pads and Brembo slotted/drilled discs, Stainless Russel brake lines, and new OEM Honda rear wheel hubs/bearings, ARP rear studs
40/40 Integra proportioning valve & New OEM 15/16" Civic EX master cylinder
Energy rear trailing arm bushings, front sway bar bushings, front endlink bushings, rear sway bar bushings, etc.
Honda OEM steering rack bushings, endlinks, hardware and OEM boots
Blox purple anodized rear lower control arms. Brand new, just installed. (OEM LCA's also included)
All new OEM Honda CRX weatherstripping and window channels replaced when sprayed Frost White. All new door sash's and new window sils on the exterior. All replaced with OEM Honda parts. (these are discontinued and hard to find. $1,000 worth of moldings alone...)
OEM JDM EF8 SiR rear interior
S2000 Sun Visors custom fitted, Acura LEGEND rearview mirror, and Black tweed recovered headliner
JDM EF8 AirCon climate control unit
JDM GATHERS cassette player and AUX cord
CUSTOM single din console with CUPHOLDERS!
Custom red carpet. CTR colour, custom batch made. Also, S2000 Pedals and dead pedal!
Custom power window setup with OEM single action switches and OEM cranks/motors. Looks clean and works perfectly.
New seatbelts were just installed last summer at the dealership per Hondas "free seatbelt replacement for life" guarantee. The belts retract perfectly and don't sag.
All black dyed interior. Done professionally at Quanz Automotive with SEM Landau Black using Bulldog adhesive promoter. Dash is crack-free. Door speaker covers had usual cracks and the door panels are not mint, but in good shape.
Custom modified Civic EK armrest with matching leather e-brake handle
Add up all the parts yourself.....
Asking $2,500 as is or $1,500 for the rolling shell without any of the JDM parts or exhaust
Last edited by FakeJDMEF8; 01-08-2013 at 07:21 PM.
#5
Re: 1991 CRX Si Rolling Shell with JDM EF8 conversion, S2000 seats, etc....
very cool and unique crx. But $4k for a bring your own wheels shell that needs paint? Not saying that as a judgment on you, just thinking I got a deal on my crx.
#6
Honda-Tech Member
Thread Starter
Re: 1991 CRX Si Rolling Shell with JDM EF8 conversion, S2000 seats, etc....
I know that, and as with these things, cash is king.
I have three other, running cars, and am nowhere near needing to sell this car.
In NM it's hard to find a CRX that hasn't been fu*d out or been wrecked, let along have clean JDM parts...
Thanks for the bump
I have three other, running cars, and am nowhere near needing to sell this car.
In NM it's hard to find a CRX that hasn't been fu*d out or been wrecked, let along have clean JDM parts...
Thanks for the bump
Trending Topics
#9
Honda-Tech Member
Thread Starter
Re: 1991 CRX Si Rolling Shell with JDM EF8 conversion, S2000 seats, etc....
thanks guys. i really want someone to take this and do it right. i fear of someone taking it and fuc*ing it out and wrapping her round a light pole.....someone please save her! if i wasnt addicted to AWD id completely keep her.
spread the word! $100 via PayPal gift or cashhhh to anyone who facilitates the sale of this car!
spread the word! $100 via PayPal gift or cashhhh to anyone who facilitates the sale of this car!
#12
Honda-Tech Member
Thread Starter
Re: 1991 CRX Si Rolling Shell with JDM EF8 conversion, S2000 seats, etc....
pending payment. that was fast!.....will update once car is actually sold.
#15
Honda-Tech Member
Thread Starter
Re: 1991 CRX Si Rolling Shell with JDM EF8 conversion, S2000 seats, etc....
thanks nick! good luck with the SRT4! sorry to hear about that whole situation!
let's get this sold!
let's get this sold!
#19
Honda-Tech Member
Join Date: May 2001
Location: boise idaho
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1991 CRX Si Rolling Shell with JDM EF8 conversion, S2000 seats, etc....
man, good looking shell. sadly, i see a thread for my fake ef9 in the future too
glws, free bumps
glws, free bumps
#20
Honda-Tech Member
Thread Starter
Re: 1991 CRX Si Rolling Shell with JDM EF8 conversion, S2000 seats, etc....
Thanks dude, I'm selling this to fund a b18c swap into your old wagon!
This spring it will finally be done!!!!
This spring it will finally be done!!!!
#21
Honda-Tech Member
Join Date: May 2001
Location: boise idaho
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1991 CRX Si Rolling Shell with JDM EF8 conversion, S2000 seats, etc....
awesome! cant wait to see the old girl mobile again. the wife and I definatly miss that car.
bump up!
bump up!