Help
#1
Help
I'm doing an h22 swap to my 94 stick accord. Problem: the engine was on automatic transmission I have stick. I know the F and H series are compatible but will it matter if the H was automatic ?
#2
Honda-Tech Member
Re: Help
Yes, the passenger side engine mount bracket welded to the frame rail is wrong... you will need to purchase the original weld-on bracket for a manual transmission car and have it welded on... after removing the spot welds and prying off the original one. A splash of paint rounds out the fix. You will also need to use a manual trans bracket.
#3
Re: Help
Mine is already manual. Your talking about the mount brackets on the actual engine correct? The engine I wanna put in my accord is auto but I'm hoping if I do have to convert the engine to manual it won't be a pain in my ***
#4
Help
Swap the flywheel and clutch to the new engine and you should be good to go.
That's if you're using the manual trans too
If you're doing what I think you are. Manual chassis, manual trans, auto engine
That's if you're using the manual trans too
If you're doing what I think you are. Manual chassis, manual trans, auto engine
Thread
Thread Starter
Forum
Replies
Last Post
truevietluv636
Honda Civic / Del Sol (1992 - 2000)
14
05-17-2023 12:26 PM
EFbattleSedan
Honda Accord (1990 - 2002)
1
06-30-2013 06:07 AM
whatafool
All Motor / Naturally Aspirated
1
05-28-2006 09:55 AM