H22A M2B4 LSD unit - will it fit in a USDM H22 Tranny?
10-02-2008, 11:37 PM
#4
D Tranny Guru
Re: H22A M2B4 LSD unit - will it fit in a USDM H22 Tranny? (pcguy760)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pcguy760 »</TD></TR><TR><TD CLASS="quote"> 
</TD></TR></TABLE>
Quit crying emo boy!!!!
LOL, JFWY.
A local shop/tuner had a JDM LSD tranny, only who he bought it from had to DRIVE the passenger side axle out.....only it cracked the outer casing where the diff bearing was. I was called in to help transplant the LSD.......10 minutes later it is called a no go.
It sucks.
</TD></TR></TABLE>Quit crying emo boy!!!!
LOL, JFWY.
A local shop/tuner had a JDM LSD tranny, only who he bought it from had to DRIVE the passenger side axle out.....only it cracked the outer casing where the diff bearing was. I was called in to help transplant the LSD.......10 minutes later it is called a no go.
It sucks.
10-03-2008, 09:31 AM
#5
Honda-Tech Member
Thread Starter
Re: H22A M2B4 LSD unit - will it fit in a USDM H22 Tranny? (Mista Bone)
Alright I guess its better to just get a complete M2B4 LSD Tranny then...
10-05-2008, 05:24 AM
#6
Junior Member
Join Date: Jul 2002
Location: Katy, TX, USA
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22A M2B4 LSD unit - will it fit in a USDM H22 Tranny? (pcguy760)
Ok so thats a no go but what about this?? Can the internals from a M2B4 transmission be mounted into a USDM M2Y4?? Or any US H22 tranny? Reason i ask is I cracked my bell housing on the M2B4 by the slave cylinder mount. I think I just need a bellhousing????
10-17-2008, 11:24 PM
#7
Honda-Tech Member
Thread Starter
Re: H22A M2B4 LSD unit - will it fit in a USDM H22 Tranny? (swarsi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by swarsi »</TD></TR><TR><TD CLASS="quote">Ok so thats a no go but what about this?? Can the internals from a M2B4 transmission be mounted into a USDM M2Y4?? Or any US H22 tranny? Reason i ask is I cracked my bell housing on the M2B4 by the slave cylinder mount. I think I just need a bellhousing????</TD></TR></TABLE>
No from what I read, those two are housings are not interchangeable.
No from what I read, those two are housings are not interchangeable.
Thread
Thread Starter
Forum
Replies
Last Post
H22NOSACC
Honda Prelude
12
10-05-2004 07:47 PM
