clutch engagement issue
#1
clutch engagement issue
1992 accord ex with 91lx trans
So, the new parts are installed. Clutch, pressure plate and throw out bearing and i still can't get the car's clutch to fully engage. What could it be? I've replaced the slave and the M.C works. Clutch fork?
(the fork had a little notch at the too where the t.o bearing slide on)
When I say fully engage, I'm meaning the car won't go into gear with the stock push rod in the slave. I have to put something longer in the slave to fully disengage the clutch to go into gear.
So, the new parts are installed. Clutch, pressure plate and throw out bearing and i still can't get the car's clutch to fully engage. What could it be? I've replaced the slave and the M.C works. Clutch fork?
(the fork had a little notch at the too where the t.o bearing slide on)
When I say fully engage, I'm meaning the car won't go into gear with the stock push rod in the slave. I have to put something longer in the slave to fully disengage the clutch to go into gear.
Last edited by SWK_cb9; 06-11-2012 at 07:45 AM.
Thread
Thread Starter
Forum
Replies
Last Post