Bleeding a Clutch on Cable trans
10-10-2011, 08:18 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2010
Location: Silver Spring, Maryland
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Bleeding a Clutch on Cable trans
Hey guys, my clutch pedals's spongy as a ****
. I thought it was the clutch but it turns out that the clutch need to be bleed. I currently have a jdm b16a with cable trans. Can you guys help me with a guide on how to bleed the clutch on a cable trans?
. I thought it was the clutch but it turns out that the clutch need to be bleed. I currently have a jdm b16a with cable trans. Can you guys help me with a guide on how to bleed the clutch on a cable trans?
10-10-2011, 10:48 AM
#3
Honda-Tech Member
Join Date: Oct 2002
Location: chicago burbs, Il, USA
Posts: 5,150
Likes: 0
Received 23 Likes
on
23 Posts
Re: Bleeding a Clutch on Cable trans
maybe if the cable frays and it pokes you, then you bleed.
General walk through of each system;
hydraulic system:
clutch pedal --> clutch master cylinder --> fluid --> slave cylinder --> clutch fork
cable system:
clutch pedal --> cable --> clutch fork
"bleeding" the system refers to removing the air from the hydraulic fluid used between the master and slave cylinders. In a cable clutch setup that link is done by a cable rather than hydraulic fluid.
General walk through of each system;
hydraulic system:
clutch pedal --> clutch master cylinder --> fluid --> slave cylinder --> clutch fork
cable system:
clutch pedal --> cable --> clutch fork
"bleeding" the system refers to removing the air from the hydraulic fluid used between the master and slave cylinders. In a cable clutch setup that link is done by a cable rather than hydraulic fluid.
Thread
Thread Starter
Forum
Replies
Last Post
Speed_69
Honda Civic / Del Sol (1992 - 2000)
2
04-21-2006 11:00 AM
