Sticking exhaust valves, wierd case here!
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2003
Location: montreal, qc, canada
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
Sticking exhaust valves, wierd case here!
Hey gang!
Just finished replacing my valve seals on my h23, and i noticed that on my #4 cylinder both valves are sticking to their seat. I get a great leakdown result, but if i try to push manually those 2 valves (with the wood end of a hammer for example) they are hard to push down initially then the rest of the course is fine. Everytime they come back to their seating place they seem to be sticking to it.
Every other valve, intake or exhaust, moves smoothly in any way.
Should i be concerned about possible engine failure?
Just finished replacing my valve seals on my h23, and i noticed that on my #4 cylinder both valves are sticking to their seat. I get a great leakdown result, but if i try to push manually those 2 valves (with the wood end of a hammer for example) they are hard to push down initially then the rest of the course is fine. Everytime they come back to their seating place they seem to be sticking to it.
Every other valve, intake or exhaust, moves smoothly in any way.
Should i be concerned about possible engine failure?
Thread
Thread Starter
Forum
Replies
Last Post
W95civicEXcoupe
Honda Civic / Del Sol (1992 - 2000)
300
12-23-2015 08:42 PM
mikecp
Honda S2000
9
07-26-2015 08:00 AM
JamesB1985
Honda Accord (1990 - 2002)
5
03-04-2013 02:33 PM