Sticking Brake Caliper
#1
Trial User
Thread Starter
Join Date: Apr 2000
Location: Albany, NY, USA
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Sticking Brake Caliper
My driver's side rear caliper is sticking. I think I need a new caliper, but hope you guys can clue me in.
The facts:
- Sliders slide fine
- Ebrake works fine
- Pads are not stuck
- Piston is aligned with pad properly
- Piston rotates. It was sticky at first, but rotates freely after a little turning.
- Brakes work fine
So do I get a new caliper or what?
Thanks in advance.
The facts:
- Sliders slide fine
- Ebrake works fine
- Pads are not stuck
- Piston is aligned with pad properly
- Piston rotates. It was sticky at first, but rotates freely after a little turning.
- Brakes work fine
So do I get a new caliper or what?
Thanks in advance.
#4
Trial User
Thread Starter
Join Date: Apr 2000
Location: Albany, NY, USA
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sticking Brake Caliper (TodaSi)
It's only the driver's side rear caliper that sticks.
I haven't bled this one since spring, but I don't see what difference that makes. Fluid was changed 1000 miles ago. SS lines and speed bleeders installed then too. Brakes work fine. Master cylinder is fine.
It's not the bearings. The wheel spins freely once the brakes are removed.
I haven't bled this one since spring, but I don't see what difference that makes. Fluid was changed 1000 miles ago. SS lines and speed bleeders installed then too. Brakes work fine. Master cylinder is fine.
It's not the bearings. The wheel spins freely once the brakes are removed.
Thread
Thread Starter
Forum
Replies
Last Post
projekthonda02
Suspension & Brakes
2
04-15-2012 03:13 PM
Arvid
Honda CRX / EF Civic (1988 - 1991)
13
08-04-2004 03:34 PM
X2BOARD
Honda Civic / Del Sol (1992 - 2000)
58
11-07-2003 12:58 PM