Spal Fan Relay
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2012
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Spal Fan Relay
I have a 13" spal fan and everyone kept telling me i need to put a relay on the fan. So i went ahead and bought a spal relay fan kit from spal. Im confused which wire goes where? The diagram it came with says wire it to a switch. I want to wire it to the stock wiring so it comes on with hondata. The relay comes with a yellow and red wire and 2 small gauge wires that are gray and orange. Has anyone bought this relay before? If so how did u wire it to the stock harness?
#2
Honda-Tech Member
Re: Spal Fan Relay
The small wires are most likely the coil control wires, and as long as your ECU can handle the current.
This is actually a nice upgrade for an S10 Vortec Pickup.
This is actually a nice upgrade for an S10 Vortec Pickup.
#6
Honda-Tech Member
Join Date: Mar 2009
Location: portland
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Re: Spal Fan Relay
Ya I got their relay kit to wire it directly to the battery, just wondering What to do with my excitsing two wires from the engine harness that went to the stock fan. Do I hook them up to relay?
Trending Topics
#8
Honda-Tech Member
Join Date: Jan 2004
Location: houston, texas, usa
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
#11
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: Spal Fan Relay
The rad fan relays coil fuse is 7.5A, the relays power is at least a 15A and more likely a 20A fuse.
A spall high output fan can pull up to 40A.
OP, regadless of the above crappy advice, use the spall relay kit, the thick yellow lead to the batt. w/fuse, red to fan, ground either of the thinner leads and connect the other to the OEM rad fan power lead.
The above is only needed if the spall fan you have is rated at more then 15A max current draw.
If you have a "high output" spall fan then you need to check the currant limit of the rad fan relay you got. 94
#12
Re: Spal Fan Relay
I have a 13" spal fan and everyone kept telling me i need to put a relay on the fan. So i went ahead and bought a spal relay fan kit from spal. Im confused which wire goes where? The diagram it came with says wire it to a switch. I want to wire it to the stock wiring so it comes on with hondata. The relay comes with a yellow and red wire and 2 small gauge wires that are gray and orange. Has anyone bought this relay before? If so how did u wire it to the stock harness?
#13
Thread
Thread Starter
Forum
Replies
Last Post