Problems with 97 Civic EX w/ E-manage - error code 11
05-07-2006, 09:33 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2002
Location: EVV
Posts: 1,021
Likes: 0
Received 0 Likes
on
0 Posts
Problems with 97 Civic EX w/ E-manage - error code 11
Everything is wired up correctly according to this diagram.
Turbo D16 E-manage OBDII
Also, I had E-manage on my 96 Civic with has since been removed but I have double check against my wiring harness and it is correct.
I'm getting a error code 11 on the E-manage when the car is started. Greddy's manual says its:
Error Codes
"Incorrect wiring or disconnected Airflow Signal 1"
I have wired the MAP in correct to it. Both through RED/GRN and through GRN/WHT, and were still getting the code. What else could I check or could be causing the problem? Could the E-manage be set-up incorrectly? It's pre-programmed so I don't think thats it.
Thanks.
Shane
Turbo D16 E-manage OBDII
Also, I had E-manage on my 96 Civic with has since been removed but I have double check against my wiring harness and it is correct.
I'm getting a error code 11 on the E-manage when the car is started. Greddy's manual says its:
Error Codes
"Incorrect wiring or disconnected Airflow Signal 1"
I have wired the MAP in correct to it. Both through RED/GRN and through GRN/WHT, and were still getting the code. What else could I check or could be causing the problem? Could the E-manage be set-up incorrectly? It's pre-programmed so I don't think thats it.
Thanks.
Shane
Thread
Thread Starter
Forum
Replies
Last Post
Pak Lang
Honda Civic / Del Sol (1992 - 2000)
1
02-25-2017 05:51 PM
