Christian_eg6

Im planning on putting a poormans type r set up together
I have a gsr block
Ls crank
Ls rods
Itr pistons
Im going to stick to the stock bore
b16 head i already have the complete head package and what not, but my head is tapped for vtec because of the previous person, do i run the vtec line into the block or can i cap the tap off?
But i have a few questions
Do i have to run the gsr block breather box?
And would I go with LS rod bearings, ls main bearings and ls thrust washers or gsr?
And since the oil squirters or on the rods for the ls how can i kill the oil squirters on the gsr block?
and is there anything else im missing help would be great

Thanks in advance

kingofbattle909

iTrader: (6)

https://honda-tech.com/acura-integra...ype-r-1479462/
https://honda-tech.com/all-motor-nat...tions-2917793/
"best" poormans type-r set up | ClubCivic.com - Your Online Civic Community
Building A "poor Man's Type-r" - Swaps - Red Pepper Racing
poor man's type R | HondaSwap
https://answers.yahoo.com/question/i...0160543AAQyBON
Poor Man's Type R How To - Honda Civic Forum
What is a poor man's Type R - ClubIntegra.com - Acura Integra Forum