My son brought the car home and said it was running rough. I put the reader on and got P0303,P0304,P1399. I cleared the codes to reset and just got the second two after about 4 minutes of idleing from a cold engine. Although the engine was running rough I didn't get the engine light for 4 minutes. I changed plugs cap rotor checked the resistance of the wires and of the coil. Found the secondary winding to be out of limits but when I went to the parts store for a new coil the readings were the same as the old one. The compression was good on all the cylinders and didn't leak down. Pulled the plugs after 15 minutes of driving all look brand new except no. 4. Please offer any help. Thanks
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.