No power to locks, windows, sunroof. After hid install
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2013
Location: Montana
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
No power to locks, windows, sunroof. After hid install
Hey guy I am absolutely stumped on this one. Yesterday I installed a pair of HID's on my ej1 install was clean and had no issues. However when I was done I noticed I have no power to my door locks windows an sunroof. I checked all the fuses and none are blown. I was thinking this could be due to the demand of power for the lighting? But even when my lights are off I still have no power. Anyways I would really appreciate some input on where to start here...
#4
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: No power to locks, windows, sunroof. After hid install
Recheck the fuses, DO NOT just eyeball them, test them in their sockets using a 12V test light.
Did you check/test the main fuse, [fuse 36 in engine bay fuse box? 94
Did you check/test the main fuse, [fuse 36 in engine bay fuse box? 94
Last edited by fcm; 12-27-2013 at 07:22 AM. Reason: afterthought
#5
Honda-Tech Member
Thread Starter
Join Date: Aug 2013
Location: Montana
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Re: No power to locks, windows, sunroof. After hid install
I haven't checked the fuses with a test light, I wi try tht tonight an let you know thanks.
Thread
Thread Starter
Forum
Replies
Last Post
tmort
Honda Civic / Del Sol (1992 - 2000)
1
10-13-2012 12:05 PM
green eyed bandit
Acura Integra
3
11-16-2011 06:14 AM