Matching Engine vin and dash vin
10-15-2010, 04:09 PM
#1
Trial User
Thread Starter
Join Date: Oct 2010
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Matching Engine vin and dash vin
Should the two match?
I see that the engine vin beginning has the engine ID and some other numbers and dash vin beginning has the year/manufacture/model id and other numbers.
But the last 6 "id digits" are the actual car id and should match right? If not the motor has been replaced?
I see that the engine vin beginning has the engine ID and some other numbers and dash vin beginning has the year/manufacture/model id and other numbers.
But the last 6 "id digits" are the actual car id and should match right? If not the motor has been replaced?
03-25-2011, 09:55 PM
#2
Honda-Tech Member
Re: Matching Engine vin and dash vin
anyone know the answer to this? When shopping for honda almost every seller says something along the lines of It's got a new motor" or "motors from an si" How do i tell if someone replaced the original motor in a honda?
03-25-2011, 10:52 PM
#3
H-T White Ops
Re: Matching Engine vin and dash vin
I have a '98 Civic and I couldn't manage to find a VIN on the engine itself, but there is one on the transmission next to where it mates to the engine. The VIN on the transmission matches my car's VIN.
Additionally, there is a number printed under the engine code stamped on the engine. If you go to Honda and have them run a VIN Status Inquiry for you, you can find out the original engine number.
Additionally, there is a number printed under the engine code stamped on the engine. If you go to Honda and have them run a VIN Status Inquiry for you, you can find out the original engine number.
Thread
Thread Starter
Forum
Replies
Last Post
