edhogan1224

Okay guys, i got a set of DSM Blue top injectors (450cc?) for dirt cheap and i d like to put them into the 1991 CRX Si with an LSvtec that im building. The motor is all stock (b16 head, gsr cams, itr pistons, ls rods, ls crank). Im curious if i need to use a resistor box, and if so how would i go about hooking all that up? Im totally new to this, have never messed with injectors before so go easy on the flaming.

grumblemarc

iTrader: (4)

Try Google?

edhogan1224

I searched google, the only thing i could come up with wasnt specific enough for me. Maybe im just thick headed, but i believe that my crx came with a resistor box that i can use?

I was mainly trying to get answers specific to my application (b-swap 90-91 crx) so there isnt any guessing.

grumblemarc

iTrader: (4)

If your CRX has a resistor box then you don't need one. I'm pretty sure I can find a resource on Google in less than a minute.

grumblemarc

iTrader: (4)

Here's one.
http://www.crxcommunity.com/viewtopic.php?f=4&t=26735

grumblemarc

iTrader: (4)

Another.
http://www.d-series.org/forums/force...-90hf-crx.html

grumblemarc

iTrader: (4)

And another.
http://www.crxcommunity.com/viewtopic.php?f=4&t=49641

grumblemarc

iTrader: (4)

And another.
http://crxcommunity.com/viewtopic.php?f=4&t=12509