How do I/can I de-pin harness connectors?
02-21-2008, 08:22 AM
#1
Junior Member
Thread Starter
Join Date: Jun 2007
Location: mesa, az, usa
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
How do I/can I de-pin harness connectors?
Long story short, I have 2 connectors that I need to use in a harness I'm making, but they've got like 22 gauge wires in them, and that won't carry the current. I also have a grip of other connectors that are the wrong configuration, but a larger wire gauge, big enough to carry the current. So what I want to do is de-pin both the correct and the incorrect connectors, then put the larger wires from the incorrect connectors into the correct connectors. VOILA!
Now, how do I get the wires and pins out of each connector without damaging anything? Any tips? Pics? Help? Thanks in advance.
Now, how do I get the wires and pins out of each connector without damaging anything? Any tips? Pics? Help? Thanks in advance.
02-21-2008, 12:43 PM
#2
Honda-Tech Member
Join Date: May 2001
Location: Trinidad, W.I.
Posts: 5,089
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do I/can I de-pin harness connectors? (i hate import cars)
A small flat tip screw driver will do, just undo the harness plug so it opens up and stick the flat tip tool into the wire entrance. I am not good at explaining this so pics might help, do a search on the net as I'm sure there are pics of this being done.
Thread
Thread Starter
Forum
Replies
Last Post
