NealWright

Pretty simple ... I've been searching my head off, and can find no reference on how to buy. Plenty of recommendations. JDMSh*t seems to be a preferred seller, but can't seem to get an e-mail response from them.

I'm wondering ... Are these still made? I can't even figure out how much they should cost?

Maybe there is another alternative out there? My biggest priority is obviously high quality ... which seems to be between HCP and Hasport. Then I also want common stock axles ... which seems to only be HCP ('93 Integra axles).

As far as I can tell from Hasport, only their custom axles will work?

Any help would be appreciated! Any source for the rear trans bracket too?
Thanks, Neal

Hasport

we have the hasport EKH2 mount kit in stock

yes our mount kits and axles are designed to work together

you can order from our website or any one of our dealers

a rear engine bracket from a 94-95 prelude vtec will work

NealWright

Just to confirm ... you're saying that there are no common stock (or hybrid) axles that will work with Hasport mounts?

Thanks, Neal

P.S. Are the HCP mounts really that hard to get, are they even produced anymore?

Hasport

thats correct there is not stock axle combo or hybrid combo that will work with a hasport mount kit. factory axle shafts are too long for h-swaps. there is a range of where an axle can work. these kits that say you can use factory axles are on the very edge of that range.

NealWright

Factory axles seem fine on my car even when it was lowered (I currently have an F22) ... it's just the mounts appear extremely poor quality, and all 3 are twisted to have metal/metal contact. I very much want to get rid of this wild vibration.

So, at this point I'm going to assume HCP no longer is in business (JDMSh*t won't reply to me either) ... So besides HCP and Hasport, what would be another good quality mount kit? Maybe Innovative?

Thanks, Neal

NealWright

Any input on the Innovative mounts? Good/Bad ... really want a nice reliable setup.
Thanks, Neal