h2b block grinding
#1
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Houston, TX, USA
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
h2b block grinding
what kind of grinder you guys use to grind the back of the block? will a regular air die grinder work? do i need an ANGLED grinder? Please give me some ideas.
#6
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Houston, TX, USA
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Re: h2b block grinding (PissedoffHONDA)
got the angle grinder. what edge of the disk do i grind? what i mean is hold the grinder sideways or up in down or does it matter. sorry for the lame question just dont want to mess the block up.
Trending Topics
#12
Go Tigers!
Re: h2b block grinding (PissedoffHONDA)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PissedoffHONDA »</TD></TR><TR><TD CLASS="quote">wow cool. most other people are doing it with the edge of the disk. im kinda of nervous.</TD></TR></TABLE>
if you've never used a grinder, just go get a random piece of metal and just grind stupid **** into it. you'll get so much grinding confidence
if you've never used a grinder, just go get a random piece of metal and just grind stupid **** into it. you'll get so much grinding confidence
#14
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: h2b block grinding (hpi247)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hpi247 »</TD></TR><TR><TD CLASS="quote">i wish i bought a grinder. ended up using a dremel, and A LOT of demel wheels.</TD></TR></TABLE>
damn, that must have took hours
damn, that must have took hours
#15
Honda-Tech Member
Join Date: Sep 2005
Location: NJ, USA
Posts: 975
Likes: 0
Received 0 Likes
on
0 Posts
Re: h2b block grinding (skunked)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skunked »</TD></TR><TR><TD CLASS="quote">
damn, that must have took hours </TD></TR></TABLE>
it was a pain. especially since i didnt grind enough off and had to continue grinding while the engine was mounted. oh well, it was worth it. H2B is the sh*t
damn, that must have took hours </TD></TR></TABLE>
it was a pain. especially since i didnt grind enough off and had to continue grinding while the engine was mounted. oh well, it was worth it. H2B is the sh*t
#16
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: h2b block grinding (hpi247)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hpi247 »</TD></TR><TR><TD CLASS="quote">
it was a pain. especially since i didnt grind enough off and had to continue grinding while the engine was mounted. oh well, it was worth it. H2B is the sh*t </TD></TR></TABLE>
It's a good idea to fit the midshaft and axle on the block while the motor is out
I had to grind a little as well, not fun on your back under the car
it was a pain. especially since i didnt grind enough off and had to continue grinding while the engine was mounted. oh well, it was worth it. H2B is the sh*t </TD></TR></TABLE>
It's a good idea to fit the midshaft and axle on the block while the motor is out
I had to grind a little as well, not fun on your back under the car
#17
Re: h2b block grinding (skunked)
Hey how much is there to grind? i have the QSD kit but i can only get a DA intermediate shaft and for some reason my DC intermediate shaft will not fit.
Thread
Thread Starter
Forum
Replies
Last Post
SOUNDEFFECTS
Forced Induction
6
11-26-2002 07:23 AM