hatchdrvr

I've been trying to track down a suspected vacuum leak and have had no luck. I tried the carb cleaner trick with no noticeable results. I'm running out of patience with this and am open to ideas about what the problem could be. This is on a 2nd gen B16a SIR II in a '95 hatch and the car idles @ 1100 rpms with the idle adjust screw all the way down.
Anyone have any suggestions?

Thanks

dfoxengr

can you hear it?

VTEC-DA

Did it start doing it all of a sudden, or did it start doing after you did something to the car?

bluice00

spray 2+2 carb cleaner while the engine is at idle on all vacuum lines if the is=dle picks up u've found ur leak. it worked for my 00 SI

hatchdrvr

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybridvteceg &raquo;</TD></TR><TR><TD CLASS="quote">can you hear it?</TD></TR></TABLE>

No I can't tell. The valves on this motor need to be adjusted something fierce and btween that and the STR cam gears I can't hear a damn thing

hatchdrvr

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTEC-DA &raquo;</TD></TR><TR><TD CLASS="quote">Did it start doing it all of a sudden, or did it start doing after you did something to the car?</TD></TR></TABLE>

The motor just got put in last weekend and is bone stock except for STR cam gears.

Davep

Have you done the setting idle procedure in the helms?