Euro R Swap OBD2 ECU Pinouts......
01-15-2006, 09:33 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2004
Location: Tucson, Az
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Euro R Swap OBD2 ECU Pinouts......
The swap is being done in a '97 Prelude Base (H22A4)
I will be purchasing the OBD2a-OBD2b conversion Harness....
I need the pinouts for the OBD2b Euro R ECU, or 99 Accord.....
I need the specific pinout location for the Vaccuum Assist Sensor located at the fuel rail on the Euro R H22...it is a 2 Wire plug, and I need to hard wire it to the ECU....I also need the pinouts for the IACV....the euro R uses a 3 wire setup, and the stock harness is 2 wire, I am using the stock prelude harness....
Is the OBD2 Civic the same as far as the IACV goes???
Thanks in advance.
I will be purchasing the OBD2a-OBD2b conversion Harness....
I need the pinouts for the OBD2b Euro R ECU, or 99 Accord.....
I need the specific pinout location for the Vaccuum Assist Sensor located at the fuel rail on the Euro R H22...it is a 2 Wire plug, and I need to hard wire it to the ECU....I also need the pinouts for the IACV....the euro R uses a 3 wire setup, and the stock harness is 2 wire, I am using the stock prelude harness....
Is the OBD2 Civic the same as far as the IACV goes???
Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
HAccord96
Hybrid / Engine Swaps
10
04-16-2004 12:22 AM
HAccord96
Honda Accord (1990 - 2002)
2
04-14-2004 12:20 AM
