Re: Difference in Timing Belt B16A, B16A1, B16A2, B16A3
Originally Posted by sqishy
Not sure if this is the appropriate section to post this in.
I have done search but couldn't find anything to answer my question.
Is there any differences in the following in terms of timing belt for B16A, B16A1, B16A2, and B16A3?
I'm buying a timing belt and some places state its specifically for a B16A2 and B16A3.
I have an ODB1 B16A Jap Spec motor and doing full service ie. Belts, Water pump, tensioner and seals and what not.
Just want to confirm before I purchase the belt, water pump and tensioner.
I would assume they are all the same correct? Unless there is extra teeth on the pulleys and so forth.
Since you have the answer,I suggest you look on www.rockauto.com for a timing belt component kit.It has all three parts,and ran me about 85.00 for the whole kit.Just performed the "Major Maintenance" on my CR-V.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.