D16z6 mechanical timing question
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2012
Location: Shawano WI
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
D16z6 mechanical timing question
I just redid my timing belt and was wondering if I did it right,
I set cam time marks at 9o and 3o I made sure of it cause I set it to tdc before taking belt off, now while doing this the crank moved slightly, so I stuck a screwdriver in no#1 cylinder and made sure it was tdc moving it up and down making sure it was exactly tdc, put new belt on cranked it back 3 teeth and tightend, maybe I'm stressing to much over it but I wanna be sure, it runs fine no miss or hiccup, idles fine and I no longer have belt whine, any input would be nice how did I do?
I set cam time marks at 9o and 3o I made sure of it cause I set it to tdc before taking belt off, now while doing this the crank moved slightly, so I stuck a screwdriver in no#1 cylinder and made sure it was tdc moving it up and down making sure it was exactly tdc, put new belt on cranked it back 3 teeth and tightend, maybe I'm stressing to much over it but I wanna be sure, it runs fine no miss or hiccup, idles fine and I no longer have belt whine, any input would be nice how did I do?
#2
Honda-Tech Member
Join Date: Oct 2008
Location: Lincoln, WTF, USA
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Re: D16z6 mechanical timing question
Too much emphasis on the numbers, if you took some white out and made some dots on the teeths and the belt you wouldn't have so much of a hard time trying to find tdc.
Thread
Thread Starter
Forum
Replies
Last Post