Alright im trying to get the case to split on my d-series tranny and i can slide he housing and box apart only about an inch but then it just gets hung up on something. Ive read about a counter shaft c-clip but only found info for it on b transmissions. Is there one on the d-series and how the hell do i get it off?
Originally Posted by Syndacate
I hope while you're working on your horn nitrous button the ******* airbag explodes in your face.
Re: Cant Split the case on my D-series (92BluEH-3)
There is one on the D also. You have to take out the large sealing plug at the top (opposite end of the exposed mainshaft) of the case. Put your 3/8" ratchet in there and remove it. Then you have to get a pair of snap ring pliers or a couple of flat blades and spread that beotch apart. Then once it's expanded, tap the case and it should come off with minimal monkeying.
'97 CX - Gone '94 LS - Gone '08 CR-V EX - Wife
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.