Camshaft holder/holder plate hole is stripped and enlarged
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2003
Location: Wisconsin
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Camshaft holder/holder plate hole is stripped and enlarged
So my was taking the motor apart to check the block since I lost pressure in cylinder 4 and as I'm taking apart the head I notice one of the bolts is extremely easy to remove, finish taking everything off and BAM...Anyway to fix this or am I **** out of luck?
#3
Honda-Tech Member
Thread Starter
Join Date: Aug 2003
Location: Wisconsin
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Re: Camshaft holder/holder plate hole is stripped and enlarged
Will the bigger bolt fit in the cam holder hole though? I'm taking my block into the machine shop I may just have them fix this...
#4
Honda-Tech Member
Join Date: Mar 2005
Location: Seattle, WA
Posts: 1,260
Likes: 0
Received 0 Likes
on
0 Posts
Re: Camshaft holder/holder plate hole is stripped and enlarged
At this point taking the head to a machine shop is the best bet. They'll probably fill and re-drill a new hole.
It's sort of hard to see but is the hole just warped at the top?
Thread
Thread Starter
Forum
Replies
Last Post
tegboy321
Honda Civic / Del Sol (1992 - 2000)
21
07-28-2013 02:58 PM
Lei Siew Long
Tech / Misc
3
09-27-2001 07:18 PM