cam gear removal?????
#1
Junior Member
Thread Starter
Join Date: Sep 2002
Location: canada
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
cam gear removal?????
can cam gears be removed while the cams are still in the engine? The motor is a b18c1.........i know it doesn't matter what kind of engine but if i didn't include the engine type someone would ask!
#3
Honda-Tech Member
Join Date: Apr 2003
Location: 60ft garage, CA, USA
Posts: 5,365
Likes: 0
Received 0 Likes
on
0 Posts
Re: cam gear removal????? (b19coupe)
I used an air gun to break them loose...they come with ease. I also did it with the timing belt off cuz the gun breaks it loose so fast that the cams dont turn. But if they did turn, it would only be slightly, and u would be able to turn them back.
#6
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2001
Location: Providence, RI, USA
Posts: 1,654
Likes: 0
Received 0 Likes
on
0 Posts
Re: cam gear removal????? (Stew Pidasso)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stew Pidasso »</TD></TR><TR><TD CLASS="quote">Not to hijack, but anyone know how to get them off when the cams are out of the car?</TD></TR></TABLE>
I just slid a long screwdriver through the spokes of the gear and that was enough to hold them while I broke the bolt loose.
I just slid a long screwdriver through the spokes of the gear and that was enough to hold them while I broke the bolt loose.
Trending Topics
#8
Honda-Tech Member
Join Date: Mar 2002
Location: Southern California, U.S.A.
Posts: 9,854
Likes: 0
Received 3 Likes
on
3 Posts
Re: cam gear removal????? (.RJ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .RJ »</TD></TR><TR><TD CLASS="quote">Helms says to put cyl 1 at TDC and use a 5mm pin punch through the cam cap and cam.
FWIW.</TD></TR></TABLE>
That is if the cams are in the engine. Out of the engine, a 1/2" impact gun would be the tool of choice.
FWIW.</TD></TR></TABLE>
That is if the cams are in the engine. Out of the engine, a 1/2" impact gun would be the tool of choice.
#10
Honda-Tech Member
Join Date: Feb 2003
Location: I LOVE MY SHARPIE, Indiana
Posts: 2,542
Likes: 0
Received 0 Likes
on
0 Posts
Re: cam gear removal????? (.RJ)
if already out of car!!!!! i put a towel around the cam and stuck in vice to get the gear off the cam, i also used a 1/2in ratchet you pussies... (dont want to spend the 400 on a nice compressor yet) lucky guys
Thread
Thread Starter
Forum
Replies
Last Post
Attoir
Honda Civic / Del Sol (1992 - 2000)
4
03-27-2004 07:45 AM