b16a head on b20a "the frankinstien"
#1
Junior Member
Thread Starter
Join Date: Dec 2003
Location: New Zealand, NEw Zealand
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
b16a head on b20a "the frankinstien"
hey i brought a b20a block and i was reading the honda building book and you can bolt a b16a head on the b20a block with ease on problems and make it vtec aswell just by hooking up oil line from oil pressure sensor on back of block.and a ecu
but does this work on the b20a gold top. or the b20a black top????
your help is much appreciated
thanks
mike
but does this work on the b20a gold top. or the b20a black top????
your help is much appreciated
thanks
mike
#2
Honda-Tech Member
Re: b16a head on b20a "the frankinstien" (miketurbohonda)
you bought a B20A? you might as well use it as a boat anchor.....those B20A's found in the older 2.0 preludes are useless. you can rev them over 6500rpm without blowing them up.
the B20 you NEED is from the 98+ Honda CR-V. engine codes B20B or B20Z. if properly built they can take 8500rpm or maybe even more.
oh and i have no idea what your referring to about gold or black tops? what are those supposed to mean?
the B20 you NEED is from the 98+ Honda CR-V. engine codes B20B or B20Z. if properly built they can take 8500rpm or maybe even more.
oh and i have no idea what your referring to about gold or black tops? what are those supposed to mean?
#3
Honda-Tech Member
Join Date: Jan 2002
Location: Great Falls, VA, USA
Posts: 2,285
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16a head on b20a "the frankinstien" (non-VTEC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by non-VTEC »</TD></TR><TR><TD CLASS="quote">you bought a B20A? you might as well use it as a boat anchor.....those B20A's found in the older 2.0 preludes are useless. you can rev them over 6500rpm without blowing them up.
the B20 you NEED is from the 98+ Honda CR-V. engine codes B20B or B20Z. if properly built they can take 8500rpm or maybe even more.
oh and i have no idea what your referring to about gold or black tops? what are those supposed to mean?</TD></TR></TABLE>
Second that. You have to use a B20B or a B20Z, the B20A is about as usefull for high performance as a HF engine is.
the B20 you NEED is from the 98+ Honda CR-V. engine codes B20B or B20Z. if properly built they can take 8500rpm or maybe even more.
oh and i have no idea what your referring to about gold or black tops? what are those supposed to mean?</TD></TR></TABLE>
Second that. You have to use a B20B or a B20Z, the B20A is about as usefull for high performance as a HF engine is.
#4
Senior Member
Re: b16a head on b20a "the frankinstien" (virginia_dude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by virginia_dude »</TD></TR><TR><TD CLASS="quote">Second that.</TD></TR></TABLE>
And a third.
And a third.
#5
Junior Member
Thread Starter
Join Date: Dec 2003
Location: New Zealand, NEw Zealand
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16a head on b20a "the frankinstien" (virginia_dude)
b20a the 2 litre dohc motor
whats wrong with that???
have you not seen the browny/gold top motor in the 86model preludes and the black top rocket cover in the later model preludes
i was going to rebuild b20a with forged pistons etc.. for when my turbocharged 1600 ZC dohc motor blows up.
whats wrong with that???
have you not seen the browny/gold top motor in the 86model preludes and the black top rocket cover in the later model preludes
i was going to rebuild b20a with forged pistons etc.. for when my turbocharged 1600 ZC dohc motor blows up.
#7
Honda-Tech Member
Join Date: Jan 2004
Location: San Diego
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
Re: (KraZEtEggIE)
Back in the day people would use those cranks in ls blocks
My friend had one (81x95 ls motor in a coupe). It had crazy mid range but nothing above 7grand.
Probly would have made for a pretty good tow vehicle though......lol
My friend had one (81x95 ls motor in a coupe). It had crazy mid range but nothing above 7grand.
Probly would have made for a pretty good tow vehicle though......lol
Trending Topics
#9
Re: (ek_jeremy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek_jeremy »</TD></TR><TR><TD CLASS="quote">i thought a frankinstein motor was a k20 head on a tsx block</TD></TR></TABLE>
uzzled: i hope youre being sarcastic. although this is one variation with the k series motors
uzzled: i hope youre being sarcastic. although this is one variation with the k series motors
#10
Honda-Tech Member
Join Date: May 2003
Location: Florida
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
Re: (10secondbeast16)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 10secondbeast16 »</TD></TR><TR><TD CLASS="quote">Back in the day people would use those cranks in ls blocks
My friend had one (81x95 ls motor in a coupe). It had crazy mid range but nothing above 7grand.
Probly would have made for a pretty good tow vehicle though......lol</TD></TR></TABLE>
Did it bolt right up to the ls rods? I really want to do the exact opposite lol but i don't want to buy new rods.
BTW was that crank from a 88-91 prelude or a pre 87 or older.
Also all 3rd gen motors are black valve covers and the single cammers i think had gold tops but these motors are completely different from the black tops.
My friend had one (81x95 ls motor in a coupe). It had crazy mid range but nothing above 7grand.
Probly would have made for a pretty good tow vehicle though......lol</TD></TR></TABLE>
Did it bolt right up to the ls rods? I really want to do the exact opposite lol but i don't want to buy new rods.
BTW was that crank from a 88-91 prelude or a pre 87 or older.
Also all 3rd gen motors are black valve covers and the single cammers i think had gold tops but these motors are completely different from the black tops.
#11
Honda-Tech Member
Join Date: Jan 2004
Location: San Diego
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
Re: (red91sit)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by red91sit »</TD></TR><TR><TD CLASS="quote">
Did it bolt right up to the ls rods? I really want to do the exact opposite lol but i don't want to buy new rods.
BTW was that crank from a 88-91 prelude or a pre 87 or older.
Also all 3rd gen motors are black valve covers and the single cammers i think had gold tops but these motors are completely different from the black tops.</TD></TR></TABLE>
you use the ls block, b20a crank and b16a rods
Did it bolt right up to the ls rods? I really want to do the exact opposite lol but i don't want to buy new rods.
BTW was that crank from a 88-91 prelude or a pre 87 or older.
Also all 3rd gen motors are black valve covers and the single cammers i think had gold tops but these motors are completely different from the black tops.</TD></TR></TABLE>
you use the ls block, b20a crank and b16a rods
Thread
Thread Starter
Forum
Replies
Last Post