B16 TPS problem code 7 obd0 wiring checks out new TPS
11-13-2014, 01:02 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2009
Location: NC
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
B16 TPS problem code 7 obd0 wiring checks out new TPS
New TPS. Greenwire ground checks out. Yellow wire gets 4.6 - 4.9 V. Red wire has continuity/0 Ω back to ECU. Red wire back probed reads 20-40 mV at closed throttle, ~.35 V at wide open. There was no issue pre-swap (drove donor car home, TPS was fine.
Same red wire readings with old TPS.
Anyone know anything to suggest?
Same red wire readings with old TPS.
Anyone know anything to suggest?
11-14-2014, 01:29 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Apr 2009
Location: NC
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
11-14-2014, 05:41 AM
#5
Honda-Tech Member
Thread Starter
Join Date: Apr 2009
Location: NC
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
11-15-2014, 06:44 AM
#6
Technical Hero
Join Date: May 2002
Location: Charlotte, NC, 28227
Posts: 9,876
Likes: 0
Received 28 Likes
on
20 Posts
Re: B16 TPS problem code 7 obd0 wiring checks out new TPS
First off it's the rules of the forum to list all pertinent information including year, make and model at least. Secondly it is important because different models even within the same year range can have varying wiring colors and configurations.
Thread
Thread Starter
Forum
Replies
Last Post
