Hey i just isntalled my tachomter and for some reason its not accurate at all... Like when its at 2k rpms (stock tach) its up to lik 4K rpms on the autometer tach....
now, the instructions say to clip the Brown and Orange Wire on the back of the tach.. but On mine.. theress only a brown and a blue?? WTF? I tried clipping one, and it was the same.. then i clipped the other and Nothing changed... It's wierd because it seems as tho i could pull those wires out if i wanted (they feel loose)...
I tried every combination of the wires and its off every time
This thing was "new"... waht could be wrong
I tihnk i wired it right cause the RPM's DO read, but they're too high
Re: AutoMeter Sport Comp Tachometer Install (UJLSMoFo)
well the instructions like didn't hav ethe correct colors or anything....
I clipped both the wires and its Still messed up
Will resetting hte ecu? hae anythin to do with it.. (just disocnnect the battery)
after i clipped them , is there any other Prepping i have to do... just set the shift light?
i read somewher that ur supposed to like Hold in the top button and turn the car on, then it should read 2k and then go up 1 K per 2 seconds... (without revving or anything)... Then u shoul set it at 2k.... wtf
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.