Originally Posted by DirtySol
Your best bet is to either torque them to factory +2 ft-lb or send it off to the machine shop and have them measure it to proper stretch.
Do not torque to factory specs!!!!! most all eagle rods untill recently use 5/16 bolts (close to 8mm). factory b16 and b18c rods have 9mm bolts. if you torque to factory 33lbs you will over stretch the bolts possibly causing breakage. call eagle 662-796-7373, they will need to know the socket size of the head and the markings on the head(eagle8740 or eagleS2000 i think).