Air Fuel Ratio Gauge Wiring
#1
Air Fuel Ratio Gauge Wiring
I have a 2000 Honda Accord with an F20B. I'm trying to wire my Air Fuel Ratio Gauge, but it seems that my wiring is different from all the others.
On my harness, the O2 sensor has 4 wires: Green and Black, Black and White, Black and Yellow, And a black wire that is a slightly lower gauge than the other 3 wires.
All of the diagrams and forums I have read say nothing about any of those wires. 2 of those wires make the gauge go all the way up, and the other 2 make it do nothing.
I have read about tapping into the wire from the ecu, which is the white wire on pin c16. This wire just makes the gauge read at lean and it doesn't move much.
Any ideas?
On my harness, the O2 sensor has 4 wires: Green and Black, Black and White, Black and Yellow, And a black wire that is a slightly lower gauge than the other 3 wires.
All of the diagrams and forums I have read say nothing about any of those wires. 2 of those wires make the gauge go all the way up, and the other 2 make it do nothing.
I have read about tapping into the wire from the ecu, which is the white wire on pin c16. This wire just makes the gauge read at lean and it doesn't move much.
Any ideas?
#3
Thread
Thread Starter
Forum
Replies
Last Post