92-95 eg, S2000 cluster. Temp Gauge doesnt work?
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Jan 2004
Location: BAYAR3A, CA
Posts: 2,974
Likes: 0
Received 0 Likes
on
0 Posts
92-95 eg, S2000 cluster. Temp Gauge doesnt work?
Help needed, I'am doing a S2000 cluster in my eg and ran into this one problem(Besides the speedo..). Help will be greatly apreciated. thanks fellas
#2
Re: 92-95 eg, S2000 cluster. Temp Gauge doesnt work? (Crank)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Crank »</TD></TR><TR><TD CLASS="quote">Help needed, I'am doing a S2000 cluster in my eg and ran into this one problem(Besides the speedo..). Help will be greatly apreciated. thanks fellas</TD></TR></TABLE>
Hate to be the first to say it, but search. there is at least 10 threads going on about s2000 cluster swaps.
Hate to be the first to say it, but search. there is at least 10 threads going on about s2000 cluster swaps.
#3
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Jan 2004
Location: BAYAR3A, CA
Posts: 2,974
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92-95 eg, S2000 cluster. Temp Gauge doesnt work? (idriveacoupe.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by idriveacoupe. »</TD></TR><TR><TD CLASS="quote">Hate to be the first to say it, but search. there is at least 10 threads going on about s2000 cluster swaps.</TD></TR></TABLE>
been there, couldnt find the info i need..
been there, couldnt find the info i need..
#7
HT Order of Merit
Re: (FULL throTTLe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Crank »</TD></TR><TR><TD CLASS="quote">
been there, couldnt find the info i need.. </TD></TR></TABLE>
I guess you didn't look too well. Anyways, I believe the temp gauge will not work. Its data-bus based, not voltage. You will need a "conversion box" of sorts to get the non-functional gauges, functional.
Edit: Found it in less than 5 seconds.
https://honda-tech.com/zerothread?id=1180369
been there, couldnt find the info i need.. </TD></TR></TABLE>
I guess you didn't look too well. Anyways, I believe the temp gauge will not work. Its data-bus based, not voltage. You will need a "conversion box" of sorts to get the non-functional gauges, functional.
Edit: Found it in less than 5 seconds.
https://honda-tech.com/zerothread?id=1180369
Trending Topics
#8
Honda-Tech Member
Join Date: Jan 2006
Location: Redding, CA, USA
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
Here is the solution you wanted. And yes, there are tons of other threads about the cluster swap with almost ZERO information. Somebody get the ball rolling and it'll be ok.
Buy one of these. Voila, Temp gauge works.
http://www.modifry.com/products/ect/index.htm
Buy one of these. Voila, Temp gauge works.
http://www.modifry.com/products/ect/index.htm
Thread
Thread Starter
Forum
Replies
Last Post