hardmat

Hello Tuners and Techs,

This is not a very technical question but you guys know where to find the tools you need to work on your cars.

I have an 06 Ridgeline, 3.5L V-tech J-motor. I want to adjust my intake valves but can't find a feeler gauge in the thickness I need. The spec is .008 - .009 inches or 20mm to 24mm. So I need an .0085" or 22mm thick feeler gauge. I have spent a load of time on the internet and the phone with no luck.

My next step if this does not work is to walk into the service shop at a Honda dealer and grab someone and not let go until they tell me where to find this tool.

Any help would be appreciated.
Thanks Tim

odz-fab

use .008 and .009 feeler gauges.. adjust until .008 slides in and 9 wont go in.

thus why it says .008 to 009.

nub

Those are common sizes that you should be able to find in any auto parts store in a multi blade feeler gauge set.

speedjunkie_g35

I went to local sears for mine.