Skunk2 coilover sleeve part number help (ef)
#1
Honda-Tech Member
Thread Starter
iTrader: (2)
Join Date: Feb 2003
Location: columbus ohio
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Skunk2 coilover sleeve part number help (ef)
I picked up a set of used skunk2 coilover sleeves for my 89 hatch and im worried they are for a teg. the part numbers on the springs ended in 008 and 010.
Im also not sure which threaded body is for front or rear. Taller or shorter?
Please help
Thanks in advance
Im also not sure which threaded body is for front or rear. Taller or shorter?
Please help
Thanks in advance
#2
be professional
Re: Skunk2 coilover sleeve part number help (chirp the 1-2)
The 10 and 8 kg-mm springs are for the Integra application. Skunk2 Civic street kits come with 8 and 6 kg-mm springs. They will still work on the car, but obviously will be a bit stiffer.
The taller sleeves go in the rear. Check here for installation instructions (PDF format): http://www.skunk2.com/Suspensi...OVADJ
The taller sleeves go in the rear. Check here for installation instructions (PDF format): http://www.skunk2.com/Suspensi...OVADJ
Thread
Thread Starter
Forum
Replies
Last Post
usdm_ED7
Honda CRX / EF Civic (1988 - 1991)
1
10-09-2010 04:55 PM
redCJOteg
Honda Prelude
2
05-31-2004 03:25 PM