Skunk 2 Ball Joint Thread Pitch/Size needed! Castle Nut Size?
11-07-2006, 06:38 AM
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Left Coast : High Altitude, Top Floor
Posts: 7,616
Likes: 0
Received 1 Like
on
1 Post
Skunk 2 Ball Joint Thread Pitch/Size needed! Castle Nut Size?
I want to replace the castle nut on my skunk 2 UCA's and need to know the thread pitch of the ball joint or the size castle nut to purchase. I've already tried using an OEM castle nut and it wont thread onto the skunk ball joint.
Maybe its an SAE size? All help is appreciated.
Maybe its an SAE size? All help is appreciated.
11-08-2006, 04:03 PM
#4
Junior Member
Join Date: Aug 2006
Location: Lennoxville, Quebec, Canada
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
Re: Skunk 2 Ball Joint Thread Pitch/Size needed! Castle Nut Size? (dvp)
if this don't work just use a metrix thread pitch gauge and vernier to measure the dia
11-16-2006, 07:30 PM
#6
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Left Coast : High Altitude, Top Floor
Posts: 7,616
Likes: 0
Received 1 Like
on
1 Post
Re: (SKUNK2GABE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SKUNK2GABE »</TD></TR><TR><TD CLASS="quote">give us a call and i can see if we could sell you some hope this helps (951) 808-9888</TD></TR></TABLE>
PERFECT! I'll be sure to call. I cant find that size castle nut anywhere!
PERFECT! I'll be sure to call. I cant find that size castle nut anywhere!
12-10-2006, 03:14 AM
#7
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Left Coast : High Altitude, Top Floor
Posts: 7,616
Likes: 0
Received 1 Like
on
1 Post
Re: (SKUNK2GABE)
Bringing this one back up because I am still wondering...<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EnjoyTheRideDC2 »</TD></TR><TR><TD CLASS="quote">I want to replace the castle nut on my skunk 2 UCA's and need to know the thread pitch of the ball joint or the size castle nut to purchase. I've already tried using an OEM castle nut and it wont thread onto the skunk ball joint.
Maybe its an SAE size? All help is appreciated. </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dvp »</TD></TR><TR><TD CLASS="quote">12 x 1.25 17mm </TD></TR></TABLE>
If that were the case, the OEM Castle nut would work, which it does not...
Thread pitch, not right. Wrench size to remove the castle nut is 17mm...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SKUNK2GABE »</TD></TR><TR><TD CLASS="quote">give us a call and i can see if we could sell you some hope this helps (951) 808-9888</TD></TR></TABLE>
SO far, no luck there..
Any other help?
Maybe its an SAE size? All help is appreciated. </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dvp »</TD></TR><TR><TD CLASS="quote">12 x 1.25 17mm </TD></TR></TABLE>
If that were the case, the OEM Castle nut would work, which it does not...
Thread pitch, not right. Wrench size to remove the castle nut is 17mm...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SKUNK2GABE »</TD></TR><TR><TD CLASS="quote">give us a call and i can see if we could sell you some hope this helps (951) 808-9888</TD></TR></TABLE>
SO far, no luck there..
Any other help?
Trending Topics
12-10-2006, 10:37 PM
#9
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Left Coast : High Altitude, Top Floor
Posts: 7,616
Likes: 0
Received 1 Like
on
1 Post
Re: (dvp)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dvp »</TD></TR><TR><TD CLASS="quote">My Skunk 2 UCA's were threaded the same as the stock ones. It would be silly if thery made them different. Try contacting Skunk directly.</TD></TR></TABLE>
Do you have the original UCA's or the Revised Pro UCA's?
Do you have the original UCA's or the Revised Pro UCA's?
12-11-2006, 05:14 PM
#11
Re: (EnjoyTheRideDC2)
The old ones.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EnjoyTheRideDC2 »</TD></TR><TR><TD CLASS="quote">Do you have the original UCA's or the Revised Pro UCA's?</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EnjoyTheRideDC2 »</TD></TR><TR><TD CLASS="quote">Do you have the original UCA's or the Revised Pro UCA's?</TD></TR></TABLE>
12-11-2006, 10:11 PM
#12
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Left Coast : High Altitude, Top Floor
Posts: 7,616
Likes: 0
Received 1 Like
on
1 Post
Re: (vtecmissle)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecmissle »</TD></TR><TR><TD CLASS="quote">ive had trouble getting the stockers back on the stock arms before new ones go on a lot easier this might be the problem</TD></TR></TABLE>
I guess i'll try a new one out and see what happens. Thanks for the reply.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dvp »</TD></TR><TR><TD CLASS="quote">The old ones.</TD></TR></TABLE>
Oh, maybe the ball joint has changed. I'm referring to the revised pro set, the one with the plate on top of the ball joint.
I guess i'll try a new one out and see what happens. Thanks for the reply.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dvp »</TD></TR><TR><TD CLASS="quote">The old ones.</TD></TR></TABLE>
Oh, maybe the ball joint has changed. I'm referring to the revised pro set, the one with the plate on top of the ball joint.
Thread
Thread Starter
Forum
Replies
Last Post
EnjoyTheRideDC2
Acura Integra
2
11-07-2006 12:09 PM
PINKS
Honda CRX / EF Civic (1988 - 1991)
17
04-17-2006 06:55 PM
