99gsvtec

I just ordered what was supposed to be usdm ITR Integra Type R 22mm sway bar, so I ordered all the grommets n d brackets from dealer, the bar shows up with no place for grommets where end links go ... will this even work ? Are the ek 96-00 civic & integra bars interchangable I understans the subframe braces are different hints why complete asr ct engineering etc have different part numbers between 96-00 civic vs 94-01 integra Will this even work on my dc2 chassis ? I mic'd the bar checks out at 22mm but stumped how to attach end links Mind u this has a fresh coat of rattle can black



THIS IS HOW OEM ENDS ARE !

TunerN00b

The comptech bar has multiple endlink mounting points. 3 per side. So, it isn't an Integra Comptech bar.

I know nothing of EK to DC fitment though...

99gsvtec

Have a feeling this guys gonna screw me out of my $ his other ebay items are gone but shipped it from his work ct engineering lol Ill throw the **** through the window lol

phunhaus

It could be an EK9 CTR sway bar.

six7one

try using adjustable endlinks it might help

99gsvtec

I thought they were similar to other OEM Honda bars the hoop en for grommet ?

99gsvtec

Ya well shouldnt have to buy $50 endlinks that might not work, I dont even know if this is an Integra bar bends look like it but idk fir sure

phunhaus

Since the EK endlinks are different than EG/DC2 that might not be the case.

DC2 ITR shown with bushing/collar:



EM1 shown without bushing/collar:



I will now put money on it being a CTR sway bar. Will the bolt not go through the hole or something? What is the problem you're having with installation?

wannaBjdmca6

its a CTR one

rick_rabies

almost looks like the old school sway techniques one.


WHERE CAN WE GET TURNBUCKLE ENDLINKS?

98civdx

Has to be a ctr bar.

If you can put integra rear sway bars on civics I would guess you could use civic on integra.
But you won't be able to run integra endlinks.
You would need something like a blox endlink.