JDM 36MM Five Lug, stock EM1 intermediate shaft?
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2005
Location: 1,2,3,4 United States Marine Corps!
Posts: 3,465
Likes: 0
Received 1 Like
on
1 Post
JDM 36MM Five Lug, stock EM1 intermediate shaft?
So I have a stock EM1 and I found a JDM 5 lug conversion for sale, and it does come with 36mm axles but can I use my stock intermediate shaft on my EM1 or do I need one for 36mm axles...?? I've searched numerous sites but cannot find a clear answer to this..
Thank you
Thank you
#2
Honda-Tech Member
Re: JDM 36MM Five Lug, stock EM1 intermediate shaft?
As far as I could find on a online honda epc, the 5 lug jdm itr and jdm sir-g use the same int. shaft. Part # 44500-sr3-j01
#3
Honda-Tech Member
iTrader: (1)
Re: JDM 36MM Five Lug, stock EM1 intermediate shaft?
Same here.
I've never heard of a different intermediate shaft, and as far as I know the inner joints are exactly the same... which is about the only reason you would need a different shaft.
I've never heard of a different intermediate shaft, and as far as I know the inner joints are exactly the same... which is about the only reason you would need a different shaft.
#4
Honda-Tech Member
Thread Starter
Join Date: Apr 2005
Location: 1,2,3,4 United States Marine Corps!
Posts: 3,465
Likes: 0
Received 1 Like
on
1 Post
Re: JDM 36MM Five Lug, stock EM1 intermediate shaft?
So there's a good chance I'll have no problems using the included 36mm axles that come with the swap? The current owner doesn't really know much about this stuff so I figured someone here has had to run into that issue before..
Thanks!
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
SlammedDC2teg
Acura Integra Type-R
5
08-16-2005 06:41 PM